Shortening wires on satellite receiver.

Ok, is there a way to shorten the wires going from my flybarless controller to the remote satellites? I really don't want to spend the $20 for 2x6" wires. Why the heck do they provide the 12" wires? Really for my setup I only need 4" wires. I am thinking about just cutting the wires and soldering them but I would hate to interfere with si...

Can I use this LiFe 6.6V TX pack as a RX pack?

Im pretty sure I can but wanna get a 2nd opinion.. Im waiting for my new voltage reg to show up and I have a brand new never used 6.6V LiFe pack but its a TX pack..TX packs have thin power wires like ones on servos but this TX pack wires are the same size as my old voltage reg wires..Been searching and the only difference I see between a...

Need advice - Motor wires too short.

I am building my Warp. And I intend to use a Scorpion motor with an YGE 40A ESC. At this stage, I have basically dry fitted the frames together, trying to plan out how the final product should look. And right away, I see a problem. The motor wires on my (new) ESC are only about 3-1/4 inches long. And the (new) Scorpion HK-2520-1360 motor...

In what way mac hardware differs from PC hardware?

I was sitting idle on Saturday evening and this thought came in my mind. In what ways PC hardware is different from MAC? I am aware that Apple makes their software compatible with their hardware and they mostly use other companies hardware in their machines. Then, what is the reason why Mac is soooo expensive as compared to Windows? also,...

How to put wires through braid?

I know, I know, too many questions from me for today, but just one more last question :oops: How do you guys put the wires through braid? and on which wires you use the braid? I want to give a shiny look to my T-Rex 550 3GX V2 and have wires better protected, so I've ordered some sexy looking braid from heliheli.com. all three gauges the...

New mCP X BL, stripped wires

Hi, I am pretty sure I know the answer, but I wanted to check here anyways. I just got my brand new mCPX BL from A Main Hobbies in the mail. Upon opening the box I notice a bunch of wires without insulation, have anyone seen anything like this before? I have to assume this is not how it's supposed to be and that I have to get it replaced.

Talon 90 & Scorpion 4020-1350 v3 motor

Hello all I'm almost at the point for wiring my Gobler 500. The Talon does not have a wires with a female connection like most ESC's I've used in the past. I soldiered the male connectors on to my Scorpion 4020-1350 v3 motor wires only to find out that the wires could not possibly reach the female connectors built into the Talon. I wish I...

Stereo Wiring Killing mE!!

So, yesterday my gf gave me a Pioneer DEH2400-UB cd player for my b-day. I drive a 2000 corolla. We went to Best Buy and bought the wiring harness for this year corolla. I wired all the matching color wires from the harness we bought to the harness that came with the cd player. On the wiring harness that we bought at best buy there's and...

Copper Wire Manufacturers, Copper Wires and Cables, Solar and PV Cables, Zero Halogen Cables

The Hanferd brand of Wires & Cables are technologically advance Wires & Cables, designed and made in our state of the art facility, Copper Wires and Cables, Solar and PV Cables, Zero Halogen Cables, Copper Wire Manufacturers, PVC Wires & Cables Manufacturers Delhi in India.

XSD: Importing complex types doesn't work

I have a XML schema schema.xsd with custom types in outside file types.xsd . I don't know why my complex type typeComplex is doesn't validated correctly. Simple types like typeSimple works ok. What wrong with that ? Eclipse say: cvc-complex-type.2.4.a: Invalid content was found starting with element 'a'. One of '{"http://www.example.o...

Wiring 2 Gang Switch - Light & Fan

My husband has just tried to replace a 2 gang switch with a new one, but can't remember where the wires went! On the left it has L, L1, L2 & on the right it has the same. There are 2 red wires & one yellow one. The old switch also had a small piece of cable that was connected to the switch at both ends. Can you explain where these...

Tail boom replacement questions + update

So a quick update here, Just got my MCPX V2 yesterday and today I broke my swash plate and tail boom... I am gonna buy a new metal swash plate tomorrow and a carbon/metal tail boom. Now, that I have fully removed the broken tail boom how can I slide the tail motor wires into the new tail boom as on one side I have the motor mount and ther...

For Sale: NGK HIGH TENSION WIRES FOR 94-97 ACCORD (F22B2 non-vtec) Engine

FOR SALE: NGK HIGH TENSION WIRES FOR 94-97 ACCORD (F22B2) Engine PHP4000 NEGOTIABLE! NO LOWBALL OFFERS PLEASE. Never used, imported from the USA. (bought the wrong set of wires that's why I'm selling it) *The engine in the picture is the engine in which these wires are compatible with! You may also contact: 917 308 3191 922 494 5964...

How to discopnnect motor wires for setup?

How are people disconnecting the motor wires for FBL setup? The "stock" wiring setup for the Trex 550 makes it basically impossible to reach the bullet connectors without tearing the helicopter apart and trying to do it through the frame puts an unacceptable amount of strain on the wires. Would it be safe to run the motor wires forward t...

routing servo wires ?

ok, I'm have trouble trying to figure out how to route the cyclis servo wires on my 500se,I got used servo's that have the braid covering on them and they're not very flexible, can you guys show me some pics of how you route your wires ? I'm putting an ar7200 on the front of the boom, so I need to plug everything in to that. preferably wi...

Core Content types not available

I have a weird issue troubling my Drupal site. Upon clicking 'Add Content', my Drupal website automatically redirects to a couple of custom content types that I created using the 'Add content type' feature. For some reason, all the existing core content types such as 'Basic page', 'Article', 'Book' have disappeared. Further probing, when...

Motor Wires too Short for Easy Disconnect?

Have you guys had any problems disconnecting your motor wires for preflight checks, etc? The connectors on mine are tucked so far in that I can't grip them to plug them back together. Can't see in there - not sure if I have more slack or if the wires are just too short. Thanks for any info.

I'm Not happy but is it safe?

I am trying to wire my heli (gaui 550) and the motor and esc wires just have no where to go! I need the battery to sit as far back as possible for the CoG and this means I have routed the wires over the battery. I know this is not great and looks crappy but is it safe? The motor/esc wires and connected and then heat shrunk together so are...

Newbie Build Question(s)

Hello all, I am the proud owner of what some day might be an Atom 500, if I can swing this learning curve! Please be patient as I muddle my way through this - my first - build. Also, to be frank, relatively new to the hobby in general. Anyway, I was just sort of looking things over to get the feel for what I needed to do, and I cannot see...

How hot do your wires get?

I just finished upgrading to a spin 16300, but I don't currently have a dx6i. If I fiddle around with the included transmitter enough I can get the main motor to spin. Anyway, I noticed that after not very long, maybe a minute or so, of running the main blades at what seems to be about 1/6th throttle, the wires to the motor get pretty hot...

BSOD when removing hardware, PFN LIST CORRUPT

I have a piece of hardware called the Tweecer and it connects to my laptop vis usb. This hardware has an FTDI chip inside and is used to program the computer in my truck. If you aren't familiar with this hardware, there is some software that comes with it called calcon.exe. I use this program on my Win 7 x64 Samsung laptop to see real tim...

SlingPlayer Plugin 3.3.18.374 - Browser plug-in for viewing Slingbox units in Safari or Firefox. (Free)

SlingPlayer is the screen interface software that works hand-in-hand with the hardware inside the Slingbox to make your TV viewing experience just like that at home. It features an array of innovative features and controls, including a favorites bar, customizable remote controls, and the best streaming video money can buy. Version 3.3.18...

Need help with my 91 CRX D15B2

My car has a rough idle and RPM's bounce between 1000 and 1500. Has a sputter on idle that almost makes it want to stall out. Has stalled out a few times when I just let it run. Any ideas as to what it could be? I've changed fuses, plugs, wires, fixed ground wires, battery cable, and installed a cold air intake but nothing has calmed down...

Cha Cha Cha Changes In Car Taste

Our taste in pretty much everything changes over time. The type of music we listen to, the types of food we enjoy, the types of women we date, and of course the types of vehicles we want to drive and be seen in. We all have that car or two that will have a special...

FS (USA,CT): Omori 45mm Electric/Electronic Boost Gauge and Cup/Pod for 04-07 WRX (Green Lighting)

*POST 2 FOR PICS* For sale is an Omori 45mm Electric/Electronic Boost Gauge and Cup for '04-'07 WRX (Green Lighting). The gauge has a red needle and white numbers (to perfectly match the stock cluster gauges) and green backlighting. While the backlight matches the green lighting of the stock gauges very well, it is brighter than the stock...

kitchen lighting

I'm switching out our kitchen light. The original light had three sockets for light bulbs thus three separate wiring units. I'm replacing the light with a wiring unit with one socket. My question is: does it matter which wires I connect the new light fixture to the wires connected to the light switch? If not, can u just leave the other 2...

Right way to create custom pgsql types in django

What is the right way to create custom pgsql types for django application so that each time database is created with syncdb, all custom types are created prior to creating any tables (so that tables can use this type)? I also use django-evolution, but that's not an appropriate solution — it runs after syncdb. I can imagine doing a workaro...

Hardware ID missing

In trying to connect my GT-P 3113 tab through kies to my windows 7 32 bit os i repeatedly get this response ". It seems there is another piece of hardware attached to the tablet that windows does not recognize. also my device manager gives this message " This device is working properly.There is a secondary device connected to this hardwar...

When can I use floating-point types in Java?

I learned I cannot use floating-point types ( float double in Java) to do money calculations (and any other calculations when I need precise results). I have to use decimal number types ( BigDecimal in Java) instead. Now I wounder when I use the floating-point types. Do they provide any precision guarantee ? Suppose I would like to ca...

Servo Wires & Length

Guy's. I just wanted to put up some pictures of how to shorten your servo wires for a NICE clean heli look. I've done TONS AND TONS of these. So i thought i would share. If you wish to have a pair or a few servo wires shortened or anything electronic because you don't wish to do it. PM ME :) I'll help ya. When you build a R/C Car or Heli,...

Help with a New 12s system

My electric experience thus far is an E-Sky King, a CP Pro, and an Align 450 Putting together my first Align 600 Pro. For power, I have a 600MX / 510KV. Speed control is a Castle Creations HV 120. Haven't purchased the BEC yet, leaning toward a Castle Creations BEC Pro fed from one of the 6s batteries The speed control has the wires tinne...

I smoked my 10 flight old hp08...

After flying a few awesome flights today, I decided to direct solder the motor wires to the esc wires. I did this because the 130x was having a hard time starting up sometimes and thought it would also give a bit more juice. I've wired up professional recording studios, etc...plus I've built a few bl mcpx's so I'm pretty familiar with it.

Connecting Ground Wires

I am contemplating using a LifePO4 pack to power servos and FBL unit and using a 6s battery for the ESC(Red wire disconnected). Can someone tell me if I need to connect the -neg wires between the Life pack and the ESC to ground the heli?...

2 VBAR sliver line sensors- $140.00 each

Converted to HC3-SX so don't need these sensors. Lead wires were shortened but will wires added to return them to stock length, ( soldered on and properly shrink wrapped). New connectors crimped on and tested Over 180.00 new. 140.00 each including shipping and insurance included ( CONUS)...

Hitec optima 7, vbar and Aurora radio. how to setup.

Hello. Im a beginner with the aurora, and i have set up the vbar 3-4 times before. It is a 550E. Which wires goes where? I need a list that show me how i connect the wires from vbar and the reciever. Can someone help me? :) Greetings from Robert.

JVC DLA-X55r Projector calibrated settings?

Can anybody recommend good calibration settings for the jvc dla x55 pj? for a very dark viewing room even though the walls are magnolia, I have blackout blinds, so when viewing a movie it's pretty dark. Thanks. :lease:...

mpa to hyperion 7 cell charger..please help!!!

i just picked up the revolectrix mpa board. i own a hyperion eos 1420i 7 cell charger. i purchased an adapter cable for the mpa board that has 9 wires on it. the adaprer cable that plugs into my hyperion only has 8 wires so i can plug either my hyperion cable into the mpa board or my mpa board into my hyperion charger. can someone help me...

Mondial Money viewing ads redirect to other page

how to bypass redirect to other page after viewing ptc ads? i can't continue browsing the other ads using script because of that problem. Attached Images 3.jpg (8.4 KB) 2.jpg (19.1 KB)...

Viewing Several types of Hardware Wires from Jason Maxwell

Universal Selection Coach as well as Usb 2 . 0 as it is often commonly recognised tend to be tie in which hook up a person's gadget with a laptop or computer. Your Hardware has got a couple of closes the two developing different wiring to find out which stop would go to the laptop and even which final is always at the gadget. Women and me...

c’t Hardware Hacks - Heise Zeitschriften Verlag

Download c’t Hardware Hacks Heise Zeitschriften Verlag Genre: Nachrichten Erscheinungsdatum: 08.08.2012 Mit dieser iPad-App lesen Sie c’t Hardware Hacks im Original-Look der Print-Ausgabe. c’t Hardware Hacks erscheint viermal pro Jahr und wendet sich an alle, die mit Hardware kreativ und nicht unbedingt nur zweckgebunden umgehen wollen.