Scorpion HK-4035-560kv

helifreak.com - 2012-08-07 03:18:16 - Similar - Report/Block

I have a Scorpion 4035 - 560kv motor that i would like to sell. It came with a Logo I bought a few weeks ago and I have no use for it because I am running the Logo on 12s. It is in good condition, other than a few scratches on the can. I would like to get $120 OBO shipped for it or trade for a 400-500kv motor (not Align). PM me if Interes...

Brand new Scorpion HKIII 4035-560

helifreak.com - 2013-06-08 06:05:32 - Similar - Report/Block

Hi guys, I have a brand new HKIII 4035-560 motor for sale. I won this motor in a raffle and can't use it. I can get pics of it if needed. I would like to sell it and get the one I need. Let me know if interested. Price: $215.00 shipped to US...

FS: [NEW] Scorpion HKIII-4035-560KV Motor 600/700

helifreak.com - 2013-05-28 02:14:35 - Similar - Report/Block

This is a brand new motor out of my Logo 600SX combo kit. I decided to go with a different motor for the build. Never had screws in it, pinion, or plugged in to anything, 100% new! Sells for $250, $200 shipped. Specifications: Stator Diameter ............................ 40.0 mm (1.575 in) Stator Thickness ........................... 35.

Scorpion HKIII 4035-500 Used $170

helifreak.com - 2013-04-24 20:54:43 - Similar - Report/Block

Used in good shape, Scorpion HKIII 4035-500, 500kv. Approx two dozen flights. Purchased with another kit, and I already have two motors, so this is an extra. $170 Shipped in the Continental US. Cheers! Lee...

Scorpion HKIII-4035-560 (Logo 600)

helifreak.com - 2012-10-23 05:29:04 - Similar - Report/Block

I purchased this motor with the intent of running it in a Logo 600 on 10s. I ended up going with a 12s motor instead. This motor has *never* been used. It does, however, have 5.5 mm bullet connectors soldered on to the leads. The stock scorpion motor bullets are included as well. This motor has not been used at all. Never. I'm asking $185...

scorpion hkIII 4035 500kv

helifreak.com - 2013-04-18 03:45:57 - Similar - Report/Block

Scorpion and align motor for sale Scorpion $130 Align $70 $160 takes them both Attached Thumbnails...

Scorpion 4025 550 vs. 4035 560?

helifreak.com - 2012-09-30 06:33:19 - Similar - Report/Block

I only had 2 flight on my new Fusion 50 so far, but I could not help but notice how easily the head bogged both on hard collective and cyclic maneuvers. I have the Scorp 4025 550kv motor on 13T pinion, max pitch 14 degrees, max elev/ail 13 degrees. I liked the snappiness of the heli with these so I would not want to lower these values. I...

WTB - Scorpion 4035-560kv

helifreak.com - 2013-05-16 05:14:22 - Similar - Report/Block

Looking to complete a Logo600 build and need a motor. I have USA address for shipping to (so I pay for int.l freight). Thanks - David...

WTT: My Logo 600SX for your Logo 550SX

helifreak.com - 2013-05-08 05:27:16 - Similar - Report/Block

I'm looking to trade my backup 600sx airframe and blades in excellent condition for your 550SX airframe, blades and stock Scorpion motor also in excellent or new condition. I can include the stock HKIII-4035-560kV motor with cash or other trade items on your end to make equal trade value.

HKIII 4035-560 and NIP CC ICE2 120HV

helifreak.com - 2013-05-22 09:03:33 - Similar - Report/Block

Selling a practically new HKIII 4035-560, used on my Goblin 700 for 5 flights before I switched to a Quantum motor: $230 shipped Also a CC ICE2 120HV which came with my heli but I'm not using, still in packaging: $200 shipped Attached Thumbnails...

Scorpion HKIII-4020-1100KV - NIB

helifreak.com - 2013-02-21 08:16:56 - Similar - Report/Block

Hi there, I have a brand new Scorpion HKIII-4020-1100KV motor, with a 5mm shaft, still in original plastic bag. This motor is brand new and was taken from a Mikado Logo 500 combo kit, so you dont get the typical Scorpion box... these motors cost $189 brand new online. I am willing to let one go for %15 less, which is: $160 shipped CONUS a...

ice 120hv with scorpion 4035-560

helifreak.com - 2013-03-15 13:06:19 - Similar - Report/Block

Hey Guys I am installing a new scorpion motor 4035-560 and just want to be sure the bec will handle it ok I have the ICE 120HV installed is that a good combo for heat issues thanks fellas...

evolveStar Join

Scorpion HK 4035-400kv 6mm shaft

helifreak.com - 2013-05-14 02:04:42 - Similar - Report/Block

Scorpion 4035-400kv 6mm shaft Motor was used in my Logo 600 on 12s. Flew perfect with this motor. Used for 3 seasons. Original shaft and bearings. *Shaft has flatspot ground down for pinion. $80 paypal, shipped conus. Thx Cedric 6197233864 text friendly...

ESC advice for scorpion HKIII 4020-1100

helifreak.com - 2013-06-04 11:58:06 - Similar - Report/Block

Hi all just would like your advice on an esc for my new Scorpion Brushless Motor HKIII-4020-1100KV which is going into my new Goblin 500:YeaBaby: I have looked at the Talon 90 for around $77 but have read mixed reviews on burnouts! Or maybe the Align 100amp esc at $120+ Spec for motor are: Max Continuous Current: 78 Amps Max Continuous Po...

Scorpion HKIII 4020-1100 Mikado vs Regular

helifreak.com - 2013-04-16 03:44:18 - Similar - Report/Block

I'm building (my first) Logo 500 & looks like I didn't understand the Scorpion motor option issue. I ordered a Scorpion HKIII-4020-1100kv, 5 mm shaft plus (supposedly matching) counter bearing & motor plate. The CB & plate are both 30mm spacing, but the motor is 25mm bolt spacing, square pattern. So the components won't work together as i...

HKIII 4035 rewind

helifreak.com - 2013-04-21 17:10:09 - Similar - Report/Block

This one started out as HKIII 4035-330. Started to wind with 1.32 did half the motor as it was going into a Logo 600 so it would've been more than powerful enough however later decided to switch things around and now it is going into a Goblin 700. So I had to unwind and start over. New wind will be 6+6 1.4mm YY. I will be using 12S 45C/60...

New Scorpion HKIII-4020-1100 Motor

helifreak.com - 2013-04-20 01:46:22 - Similar - Report/Block

5mm shaft, 1890 watts & 90amp (peak), 25x25mm bolt spacing. Brand spanky new, 3 months old, never installed. Discovered I required 30mm spacing for my Logo hardware. Hopefully you can utilize in 500/550 size heli or other application. Retails between 190-200$. Will sell for $U165 shipped to your door USA/Canada. Paypal please. Specs here.

Scorpion 4035 560 & helijive ?

helifreak.com - 2013-06-03 23:45:20 - Similar - Report/Block

Guys, just picked up a X7 formula after seeing some gaui team pilots at zone last weekend, I'm putting a helijive 120 in there with a 560kv motor I have spare. I know most are using either the 500kv or the 520 ultimate, and I will probably end up with a ultimate. But for now the 560 will have to do. Looking at Mr mels the 560 with 10t pin...

Sharing battery packs between 500 and 600 helis

helifreak.com - 2013-04-11 17:48:02 - Similar - Report/Block

Hello, I have a Logo 500 and a 600. I don't like the idea of having lots of lipo laying around, so I would like to share the battery packs. Right now my 500 is equipped with CC Ice 100 and Hacker Motor (forget which one, but it is for swinging 550mm blades). I may upgrade them to Jive 100lv and Scorpion 4025-1100kv in the future. The 600...

FS Scorpion 4035-500KV Electric Motor

helifreak.com - 2013-03-01 11:41:18 - Similar - Report/Block

This motor has been used for about a year, the casing has some scuffing from canopy rubbing but it works perfectly. Bearings show no signs of giving out. 100.00 shipped. PM me for pic...

Pulse LiPo vs. Gens Ace

helifreak.com - 2013-03-18 05:49:13 - Similar - Report/Block

I usually pick up Gens ace in all of my helis, but they are out of stock. I am looking for 6S 3300mah 35C packs for a Fusion 550 12S build. Who here has used both Pulse and Gens Ace, and how do they compare? I am going to run a Castle ICE2 120HV with a Scorpion HKIII 4035-530Kv and an all Hv setup with Align HV servos on an AR7200BX. Edge...

600SX "smack" setup

helifreak.com - 2013-02-25 04:04:18 - Similar - Report/Block

I'm going to be building a 600SX soon, and i fly mainly low smack style 3D and I'm looking for a powerful setup. any suggestions? I've been looking at the Scorpion 4035-500 with the Scorpion OPTO ESC on 12S 4400 65C. any suggestions are welcome, I'm also considering a 10S setup. Scorpion 4035-560 with the OPTO ESC on 10S 5000 65C...

Which Scorpion motor and stock ESC

helifreak.com - 2013-02-25 20:02:57 - Similar - Report/Block

I've been running a Scorpion 2208-4660 and its been ok. Quieter than the stock motor and no vibrations with a little more power. Well I bent the shaft and looking for a little more motor that I can still use the stock ESN. Talked to Innv8tive Designs and they said the next 2 sizes up would be good for sport flying but for 3D the ESC may n...

Scorpion HK-4035-630KV

helifreak.com - 2013-06-02 04:18:49 - Similar - Report/Block

It was used briefly in a Goblin. I got it for my Goblin, but went with another motor. 6mm shaft, 28mm long. Asking $120 shipped and paypal'd, obo.

Xera 4035-3y-400kv motor with 6mm and 8mm shafts

helifreak.com - 2012-09-30 02:11:27 - Similar - Report/Block

Decided I like the Goblin better than the Logo 600SE so I'm parting out the 600SE. Please PM me for contact as I don't check my for sale posts often and at least with a PM I receive a pop-up notification. Up for sale is the Xera 4035-3y-400 Version 2 motor I was flying with my Logo 600SE. This motor has 332 flights on it. It includes 1 sh...

don't combine 4020-1350 and jive 100

helifreak.com - 2013-03-17 16:31:11 - Similar - Report/Block

I ordered Kontronik 100 jive from ready Heli. On the web page it said version 9 (the one that is suppose to arm the 4020-1350). However, when it came through the post, it turned out to be the latest version, version 13. VERSION 13 JIVE DOES NOT arm the Scorpion HKiii 4020-1350. No ascending beep on connection. Having read some previous th...

250mx vs. Scorpion 2206 3900kv?

helifreak.com - 2012-11-19 04:32:50 - Similar - Report/Block

Anybody have experience with both of these motors? I know the Scorpion was the one to have before the MX was out, just curious if the Scorpion is still the hot motor to put in this heli? I am looking for balls to the wall power to throw at this little guy and wondering if this heli has more to offer than the stock MX motor.

mini protos 6S 1300kv motor

helifreak.com - 2013-05-03 00:50:14 - Similar - Report/Block

I have for sale a msh 41113 1300kv 6s motor with long shaft. (they are all labeled 40118 on the motor can ?) This is off my fairly new build mini protos and was replaced with a scorpion 2520 motor. I know for a fact that this motor has less than 30 flights on it. There is not a scratch on it and was kept lubed with scorpion oil. It is in...


helifreak.com - 2013-02-21 02:36:19 - Similar - Report/Block

The motor was in my Logo 500 has about 60 flights on it, it is the HK not HKIII it has the 6mm shaft and 25mm spacing for mounts. I will take 95.00 OBO I have a logo 25mm Motor Mount I will sell for 15.00...

Scorpion Ultimate 4525-520KV Motor - ***$300.00 USD***

helifreak.com - 2013-04-09 15:53:00 - Similar - Report/Block

I have a Scorpion Ultimate 4525-520KV Motor for sale. Was placed in my Goblin 700 and has around 30 flights. Per the goblin manual, the motor shaft was shortened to a length of 28.5mm Oiled every 5 flights. Also has 6 mm scorpion bullets soldered. I am switching to Kontronik motor. Price is $300.00 shipped CONUS. Motor will be shipped in...

MSH Scorpion Question

helifreak.com - 2012-09-20 06:17:01 - Similar - Report/Block

Will the MSH41063 Scorpion Motor 2580kV run well in a T-Rex 450 Pro V2? I noticed that the shaft is longer....Will I need to modify this or will it be okay? Will I notice a difference from the Stock motor? Thanks guys, Dorantana...

is scorpion motor worth

helifreak.com - 2013-04-21 18:01:46 - Similar - Report/Block

Looking at the Scorpion 2206-3900 motor. Its $50 though. Is it a huge improvement over new align motot? If it is only a little better i would question the value. Dfcpro with minijazz esc...

KDE 550/550 motor

helifreak.com - 2012-08-07 17:18:31 - Similar - Report/Block

I decided to build a gaui X4 and this heli is really nice so I wanted to put all the good stuff on it. So I bought the hot kde motor for it and it measures 44mm body diameter which is too big for the gaui design. The motor gaui recommends is new scorpion III series. I paid good money for this kde motor and now I do not really have a use f...

Motor temperature ... Is this ok?

helifreak.com - 2013-03-18 04:50:19 - Similar - Report/Block

4035-560 motor in a align 700 v2 12 s setup with castle 160hv2 esc After a 6 minute flight, the motor comes down at 150F and batteries at 100F This ok? Or too hot?...

Scorpion HKIII 4540 400 and 770?

helifreak.com - 2013-05-16 11:30:23 - Similar - Report/Block

Hi guys, As i sold my xxtreme 800 airframe, i want to put all electronics in a Goblin 770. Does the 400kv from the scorpion work in a 14s goblin? Planning to buy a 22T 8mm pinion to get a headspeed of 1850/1900 with vbar governer. Thanks for all the comment, Regards Rogiër...

Governor Pulsing 4035-500 CC120HV w/4.02

helifreak.com - 2013-04-08 07:12:04 - Similar - Report/Block

Vbar Gov, 5.3 pro. Logo 6003d, HKIII 4035-500, CC120HV w/4.02, Hobbywing phase sensor. Mod 1 106T & 13T (8.154) 10 poles/2 = 5 I've got a pulsing from the motor with a little tail twitch(Governor pulse). I'm just looking to get some commen solutions. I've done a search and can't find anything other than a post in this thread that interest...

X -era 4035/. 300KV motor

helifreak.com - 2013-03-26 14:59:18 - Similar - Report/Block

Hi, I am looking for a X-era 4035 300kv motor please get in touch if you can help. 8mm shaft. Thank you.

scorpion motor,hyperion 60amp esc,ir receiver

helifreak.com - 2013-05-18 08:06:40 - Similar - Report/Block

scorpion hkII-22221-6 motor hyperion atlas 60a esc and scorpion ir receiver with programming card 150 obo shipped...

4035- 530/560, can I swap the cans?

helifreak.com - 2013-03-04 01:52:48 - Similar - Report/Block

I've got 2 new scorpion motors, hkiii4035-530 and hkiii4035-560. I cut the shaft shorter on the 4035-530 (for a gob630), I just decided to run with the 560 instead. Anyway, is it ok to simply swap the cans, or, are they mated somehow?...

Scorpion 4020-1100 motor can

helifreak.com - 2013-02-27 14:47:15 - Similar - Report/Block

Looking for a scorpion 4020-1100 motor can. I was having some issues about 5 months back with my T Rex 550. 3 unexplained crashes in 3 weeks. After the 3rd crash, which was a good one, I decided to ground the bird temporarily and use the funds to finish my Compass 7HV build instead of rebuilding the 550 with no promise that the problem wa...


Fill out the form you see below. Registration is free, fast and simple.
If you are already registered, sign in page login.

Web Site :
Required Field
First Name :
Required Field
Last Name :
Required Field
Email :
Required Field
Sex :
Required Field

evolveStar.com is free for ever !

evolveStar.com provides a search engine that allows you to gather information to write their own blog.

evolveStar.com enhances the sources displaying the logo of the site.

If you want to remove your site or you believe a site listed infringes copyright, please report it to: info@evolvestar.com

Specifies the subject copyright violation and the url of the page

evolveStar.com respecting the law DMCA (Digital Millennium Copyright Act) will immediately remove whatever its merits.

Next will be effectual and relevant checks.

Who We Are Partner Advertising Contacts Privacy terms Help & FAQ

© Copyright 2010-2017 Fabrizio Fichera. All rights reserved.