Change 2nd Monitor Display Setting to Duplicate

Hello I am attempting to programatically make the 2nd Monitor have a duplicate display. My function below should change the 2nd monitors display to 'duplicate display', ie, make the 2nd monitor display everything that is on the 1st/Primary monitor. My Problem: When I run my function it successfully finds the 2nd monitor and it changes th...

Problem With Monitor Display

Hi; I have a ASRock FM2A75M-DGS motherboard with an AMD A6 5400K CPU connected to a Samsung S23B550VS 23 inch Widescreen LED Monitor using the onboard VGA connector. The problem I have is that with the resolution set to anything above 1024 x 768 the monitor screen keeps going black. I have connected another monitor and this does the sam...

monitor won't wake after S3 sleep with GTX 660 Ti

My monitor remains in standby after the PC resumes from S3 sleep. I have to physically unplug the monitor from the graphics card and then plug it back; then it wakes up (but my open windows have shrunk, because the PC temporarily reverted to some lower-resolution display during the wake-up process, even though the full 2600x1600 resolutio...

BSOD 0x3b caused by igdkmd64.sys

I have an external video card which my display is connected through hdmi for video output and I have a dummy vga monitor set up with the intel igpu to take advantage of quicksync decoding for video. The problem is my system bluescreens during boot if I have my display off. Usually, I use WOL to start my system to listen to music with the...

CPU is working but no monitor display

Hi, Before few days ago my PC display is disturbed. As I started computer it work good, but suddenly display turned off while CPU working. But now no display in monitor. CPU shows lights and power supply. I have also checked RAM but there is no effect. Plz solve my problem.

Facing problem with dual display with window 7

Hi Guys We are using window 7 professional on dell (OptiPlex 380 ) system model . with dual monitor one 17 inch and one 15 inch . Sometime 17 inch monitor gets disconnected and window unable to attach that monitor. We attach that monitor with DVI cable. We use to replace that monitor with same model monitor and then we can attached secon...

[SOLVED] ati radeon catalyst HD5750 dual monitor problem

Dual monitors worked perfectly in F17; F18 has been a problem. I installed Catalyst 13.1, but then could only clone the second monitor. The System Settings menu showed plenty of other options, but none worked - no doubt because xrandr showed Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 1920 x 1920 and I was trying to get one...

Graphic Card installation problem

Hello Im trying to install a new EVGA GTX 670 FTW Signature 2 series Graphics Card. The problem is that I am not getting a signal input to my monitor so I cant install it. Its not the card as it works in my old Dell Dimension XPS machine. Does anyone know what a possible solution may be? Thanks :) Related Forum Threads Trouble instal...

desktop opens 2 windows at once.

hey all, went from crt monitor to lcd monitor. when I double click desktop icon 2 windows open instead of 1. went back to crt monitor and don't have that problem. went to lcd monitor and problem is there. went so far as to try a different desktop with the same lcd monitor and have the same problem occur. even tried a different mouse. the...

Solved: Monitor - No Signal

Monitor/System was working fine. Bf decides to play xbox using the monitor and plugs it in via a hdmi cable, plays his game and all was fine. He tried to switch between the xbox display back to the PC display using the menu button. As he was scrolling to VGA he went past DVI where the monitor went blank, displayed a "No Signal" box and we...

PC beeps, won't display anything on monitor

Hello, I am running Windows 7 64 bit and I have an Asus P8z68 deluxe motherboard. My PC was running fine (for almost a year) until today when I saw a black screen on my monitor. My monitor is set to turn off after about 15 minutes of inactivity so I moved my mouse but no display showed on my monitor. I restarted my PC a few times but I st...

E350M1/USB3 Wake on Power option?

Does the ASRock E350M1/USB3 have a wake on power option, so if the power goes out, it will automatically restart whne the unit regains power?. I dont think i saw it in the bios ... Related Forum Threads Monitor problems Asrock FM2A75M-ITX power problem Z77E-ITX compatible CPU heatsink/fans? 880GM-LE + Phenom II x4 975 upgrade not waking f...

HP Launches the Elite Display E231 Monitor

The Elite Display is a business-oriented monitor with a 23" LED backlit display and a native resolution of 1920 x 1080.

Asrock Extreme9 z77 cant get slot 3 to work in with any other cards in place

I did a search here on this and found no answer. I just was running a quad GTX 580 setup (without SLI I dont need SLI for the rendring program I use.) It was working great and I decided to upgrade to quad GTX 590's. When I put a 590 in slot 1 and slot 3 my display will not show even during the boot up. I can use a combination of slot 1,...

Extended display monitor problems with one widescreen and one 4:3 monitor?

Hi - I have recently acquired a new work computer with 1 widescreen Dell monitor (Dell E228WFPc 1680 x 1050, Monitor A) and my older 4:3 monitor (E178FPc 1024 x 768, Monitor B). The graphics card is a NVIDIA GeForce GT 620. I cannot get them both working at the same time on an extended display. One is plugged into (excuse my slightly less...

GSKILL F3-17000CL problem !

Hey , I try to run my memory at 2133 MHz , on a Asrock Z68 extreme 7 , but I can't go higher than 2000 MHz , I'll try bios 2.1 ; 2.22 beta , and 2.3 , always the same problem , I see that Asrock make a pacht for Z77 extreme 9 , I hope Asrock will do the same for Z68 user, at the beginning , with a I7 2600K , I had no problem to run at 213...

Dell U2412M monitor highly recommended.

Just picked up a Dell U2412M flat panel monitor at work this week. Thus far, pretty darn impressed with this display, especially given the cost. Got it for $275 from my Dell rep...but I also bought 4 of them. It's a 24" 1920x1200 display, e-IPS panel. It's got height adjustment, pivot and tilt. However, it does not auto rotate the screen...

Monitor Display Question for FM2A85X Extreme 6 + A10-5800k

Hi all, I really need some help here as I have scoured various forums but can't find any answers. I am actually going to purchase the parts in the next few days. My main purpose is more to multi-task, with a 3-4 monitor display. I do not require an extended desktop or eyeinfinity sort of setup as I am happy with 3 monitors displaying 3 d...

Solved: Sudden unprompted change in display settings

Hi, I'm not sure if this is specifically a problem with my monitor, or a software issue, so please let me know if I need to move the thread. I have a Samsung T27B750 monitor and it normally displays in 1080p at 1920 x 1080 with no problem. Today as I was browsing the internet though, the display suddenly changed and now doesn't fit the sc...

Windows 7 HD Monitor Issue and LCD TV. Please HELP!!

I am running Windows 7 and using an HP 2159m HD Widescreen Monitor. I have successfully installed the monitor driver from Hp and under the display properties then it is recognized. I am also using an HDMI splitter to transmit the desktop to an LCD TV in another room. On the TV the desktop shows and also the sound of whatever is being play...

N68C-GS FX Not boot with DDR3 RAM

Hi, I recently bought a new DDR3 Ram to upgrade N68C-GS FX. Previously it is running on 2G Kingston DDR2 Ram. But when I installed the DDR3 RAM (one module only, pulling out the ddr2 ram), the computer won't start. No POST beep, or any kind of beep code at all. The display show nothing but a big black screen. But when I switch back to DD...

Asrock FM2A75M-ITX power problem

I just bought a new Asrock ITX FM2A75M-ITX motherboard for one of my builds and I'm having an issue with it. I've connected everything and when I flip the PSU switch, the motherboard will power itself without having to press the power button but it does not post, even when I press the power button it does absolutely nothing. I've even ch...

AOC's 29-inch Q2963PM Monitor Wields an UltraWide Load

Here's a friendly reminder that today is the last day to file your individual tax returns (Form 1040, 1040A, or 1040EZ) unless you're requesting an extension, in which case you still have six more months. Either way, if you're looking to splurge on a display with your anticipated tax refund, AOC hopes you'll be tempted by its new Q2963PM...

Change BIOS logo? (Z77 Pro4-M)

Is there a way to change/customize the ASRock logo in the BIOS? I am building a HTPC using a Z77 Pro4-M motherboard and would like to customize it so that it looks completely like a off-the-shelf media center. Related Forum Threads ASRock 770DE3L Driver For Windows 8 False advertising by Asrock? ASROCK Z77 extreme4-m BIOS USB problem ASRO...

I'd like to ask which two USB3_0_1 or USB3_2_3 are intel USB port in extreme6? THank You!

I'd like to ask which two USB3_0_1 or USB3_2_3 are intel USB ports in extreme6? THank You! Related Forum Threads AsROCK FM2A85X Extreme 6 temperatures cant find bios v1.6 or Z77 Extreme4-M on website..but it come with 1.6 instlled 2013 Bluetooth working or not on Asrock Exteme9, how can you tell? linux on Asrock AD2550-ITX ASROCK z77 audi...

2nd monitor installation problem

I just set up a new HP computer with Windows 7 a couple days ago and everything went as normal. My previous computer had a dual monitor setup that I had installed, so I purchased a new video card for my new setup and connected everything, but now my main monitor doesn't come on at all and only the second monitor comes on and acts as the f...

VGA driver not installing

Dear all, I have original cd disk of asrock, my VGA card is called Palit GEFORCE GTX - 680, but VGA standard adapter driver isn't installing it is missing, i have installed by that cd all drivers but there is a yellow mark on device manage. what is a problem? Can u help me plz? Thanks in advanced. Related Forum Threads Asrock 990FX Extr...

Bluetooth working or not on Asrock Exteme9, how can you tell?

Greeting all, I am trying to connect a bluetooth device to my PC and it seems like everything is loaded but I cant get it to detect any bluetooth devices. I just downloaded the latest Atheros driver from the Asrock site but still nothing when I go to detect any help would be appreciated! Attached Images Related Forum Threads AsROCK FM2A8...

cant find bios v1.6 or Z77 Extreme4-M on website..but it come with 1.6 instlled 2013

cant find bios v1.6 for Z77 Extreme4-M on website..but it come with 1.6 on t (sticker too) bios dated 13/1/03 1 are asrock not updating their website?...maybe i should not but asrock any more if they going to drop support for their boards.. it been 5 months already..latest board coming with 1.6 website has1.5 (2012) and are their newer...

VGA cable incorrectly causing low resolution on monitor

Hello, I've had very good success with this board, so I'll try to resolve a problem I've had for a number of months. I have two devices that supply video, one is the PC itself, the other is a security camera system. Both use a VGA display. When I use the PC as I've been doing I get a 1280 X 1024 output, which is fine and proper and I beli...

Sound problem with 970 pro3

I hope you guys are in the know because i'm struggling. I've installed win7x64 on a ssd with a gt210 connected with hdmi on my tv I get the sound from the hdmi but not from the regular analog speakers (it's plugged on the rear green input) Could it be because i've use my hdmi monitor during the install without pc speakers connected ind...

How to display a lightweight web client window with ruby

I need to display a web page on a PAL 7" monitor with a Raspberry Pi without user controls (no keyboard, no mouse, just display). The context is : Raspberry Pi platform 7" PAL LCD monitor archlinux ARM no desktop environment xorg or eventually a minimalistic window manager (openbox, pekwm,etc.) Ruby language (1.9.3 or eventually 2.0.0) we...

Solved: 2nd Monitor not working after using projector

Hi All - I have a Dell Vostro 1700 Laptop, and I extend my display to a Planar PL2010M monitor. Worked perfectly... UNTIL, I had to use the laptop for a presentation on a projector. Ever since then, I have been having major issues with the extended display. After the presentation, I plugged the Planar back in and monitor would not display...

linux on Asrock AD2550-ITX

I need one solution to get the drivers for AD2550-ITX model for linux (no linux drivers avalible). Regards Blas Related Forum Threads AsROCK FM2A85X Extreme 6 temperatures cant find bios v1.6 or Z77 Extreme4-M on website..but it come with 1.6 instlled 2013 Bluetooth working or not on Asrock Exteme9, how can you tell? I'd like to ask wh...

970 Extreme3 Vcore problem

Hello all asrock's fan ! I have just receiving a new MB asrock 970 Extreme 3 and i have a big problem: I can't modify the cpu voltage. In the bios in manual OC mode, i can put the voltage as i want, but vcore is always to 1.36v. For example: I put 1.3v (with 2500mhz cpu) in the bios. I go out with save setting and after the reboot, my...

Asrock Bios Problem; load default after shutdown

hello. i have a pc with asrock mainboard wolfdale ASRock > Wolfdale1333-D667 (http://www.asrock.com/mb/overview.asp?c at=Download&os=BIOS&Model=Wolfdale1333-D 667) i replace battery bios with a new battery bios . also i updated bios to bios version 1.50 but problem don't solve and after shutdown bios load default and lost current time / da...

No signal on monitor

Goodmorning guys. I built up a small pc with a dh67bl MB and a i3 chip and 8gigs ram ddr3. Ps note im not pc inclined lol. The problem i have is if i use hdmi to hdmi to my TV then i get signal and do my thing on the pc, but when i connect it to my 22"monitor via hdmi to pc, dvi to monitor the windows logo starts up then couple of secs an...

H77M-ITX - UEFI P1.10 - W8-64 System will not auto Sleep - nor turn off monitor -

Windows 8 (64-bit) System tower/CPU will not enter SLEEP mode from OS -and- will NOT allow monitor to power down to sleep mode. BIOS update via UEFI Instant Internet - finds new BIOS version 1.50 but always times out when attempting to retrieve the new file from ASRock website/FTP site. I need to Download newest stable UEFI BIOS. There is...

HDMI Input: No Input Signal - Monitor Going to Sleep

Windows automatically updated last night before shutting down. When I turned on the computer this morning, the HP w2207h monitor was not functioning properly. Each time I rebooted, I received the message "HDMI Input: No Input Signal" before the monitor went to sleep. I do not believe it is a problem with the sleep and display settings as...

ASROCK Instantboot V1.23

hello as from yesterday my ASROCK Instantboot v1.23 stopped working. I have tryed different selections and the one I like to use is fast mode(pls keep AC power) on setting. I have also tryed regular mode. the computer reboots and I even get the asrock blue screen telling me it will shut the pc down message. once the computer re starts it...