Slight Vibration Normal?

helifreak.com - 2013-06-11 23:44:39 - Similar - Report/Block

Hi, Trex 500 PRO DFC, The vibration I'm talking about is when you are trying to spool up and when you look at your tail fin it vibrates until you get to max head speed and it disappear. Well I had crash last week and I just put everything together and there is that vibration that would not go away. I changed all the shaft from head to tai...

Vibration sensitivity on different sensors

helifreak.com - 2013-03-25 08:18:17 - Similar - Report/Block

I have a T-Rex 500 where I have had vibration problems since a got it a couple of years ago. I've tried all the tricks in the book to hunt down the vibrations. It's better than it was, but it's still not quite there. I have a black full-size sensor. I'm considering replacing the sensor, as the new silverline supposedly is more tolerant to...

Strange vibration feeling in Pelvic region?

babyandbump.com - 2012-10-17 07:17:40 - Similar - Report/Block

Have any of you felt this ? It feels like I have a mobile phone vibrating from the inside , like right where my ovaries are. It came and lasted about 10 minutes then went away. I have no clue what in the world it was! There wasn't any pain associated with it , just the vibration!...

User Settings - Android

stackoverflow.com - 2012-04-27 09:51:57 - Similar - Report/Block

How to make in app changes persist so that when app relaunches all settings remain same(like if from app i have selected vibration then when app is not running if my phone is ringer mode when app relaunches it sets itself to vibration)?...

130X vibration fix outcomes.

helifreak.com - 2013-04-09 01:39:36 - Similar - Report/Block

First thumbs up to forum members and their vibration fix suggestions. I read many and tried virtually all of them. Pleased to say I virtually eliminated all tail vibration. Here is what I did: Specific size O-rings for all ball links. Main shaft spacer to keep pressure off B gear. Longer screw through A gear/main shaft. Rudder control arm...

[$8.99] OrigAudio RockIt 3.0 Rechargeable Portable Vibration Speaker Turn Any Surface Into a Speaker Must Watch Video by Tanga Deal 2

dealsucker.com - 2013-05-26 16:02:22 - Similar - Report/Block

$8.99 BUY IT NOWAs Seen on ABCs hit show Shark Tank and countless other publications around the world. The RockIt 3.0 portable vibration speaker system takes music from your device and turns it into vibration sequences. It sends those vibrations through the RockIt pod which sticks to ANY object. Simply press play on your device and the...

Idle up-vibration

helifreak.com - 2013-04-23 17:41:35 - Similar - Report/Block

Seems like ever since I put in my idle up settings i have this vibration going on that just ruins flight handling any thoughts???...

Questions Regarding the Vibration Analysis and Piro in Hovering

helifreak.com - 2013-04-09 22:16:25 - Similar - Report/Block

Hi guys, Just got a G31 and quite happy with it so far. However I do have some questions: 1 Not sure what exactly does the information in vibration analysis mean. I assume the X-axis means RPM and Y-axis means vibration level. But in the log data I can choose the time (like 4m18s) too. My question is how can it have different RPM at one t...

500x RTBNF vibration

helifreak.com - 2013-02-26 14:43:48 - Similar - Report/Block

Replace Tail Bind and Fly OK so it was the tail. Specifically I replaced the housing, tail shaft and bearings. I did the change one at a time and the main difference was the tail shaft. I will measure it later today at work with a mic to see how much difference from old to new but I could feel the play in the tail shaft not in and out but...

Vybe – Custom Vibrations for Android

androidzoom.com - 2013-02-28 15:46:00 - Similar - Report/Block

Itchy Fingerz Digital Studios Create custom vibration patterns for your contacts and know who’s calling without looking at your phone. A unique experience where you can design distinct vibration patterns for your phone calls. So, now if you are in the classroom, on the road... FREE

Vibration levels

helifreak.com - 2013-05-22 14:37:53 - Similar - Report/Block

Just to share my experience I had with the mini Vbar. I had a lot '' Raised Vibration Level'' reports during a flight about 25. I really tried and checked everything. Balanced my main and tail blades, set my belt tension correct and gear mesh, blade grips, bearings, 3m mounting tape under the Vbar, blade tightness main and tail and had le...

Tail vibration question dune

helifreak.com - 2013-06-09 20:44:50 - Similar - Report/Block

I have a slight tail vibration on my dune, I notice when the Heli is spooling up that the tail blades look to be out of track but then as it gets to full rpm they seem to go back in track, is this normal? Or should this be addressed?...

evolveStar Join

New130x tail over rotating in stunt mode

helifreak.com - 2013-02-25 07:39:45 - Similar - Report/Block

I have a brand new 130x that I have done nothing but hover with indoors. I have the typical vibration during spool up that is found so commonly with this heli. Once I reach 50% throttle the vibration stops and by %60 the heli is in the air and completely stable. If I'm not in stunt mode and flip the tail around it seems to be very crisp a...

coil spring buffer

hyundai-forums.com - 2013-03-06 08:43:08 - Similar - Report/Block

I just installed a pairs of the spring buffer to the rear suspension. It make quite a difference in the handling, vibration noise and comfort when driving. The spring buffer are different in size from the front to the rear. Since I feel more vibration coming from the rear when the suv goes over potholes and bumps, I test the spring buffer...

Mini-vbar usb problem

helifreak.com - 2013-05-28 10:59:43 - Similar - Report/Block

Tonight when I connected my vbar to my pc I started encountering a problem. It will only stay connected for the first 20 seconds that it is on. If I plug the usb cable in before it is powered up, the USB text turns green in the software, then when I connect power to it the initializing screen comes up, it then goes to the home page as usu...

Noticed some motor vibes. Opened it up....

helifreak.com - 2013-06-05 01:26:04 - Similar - Report/Block

I've been chasing some very minor issues looking for perfect. I've got several posts in the aluminum tail box thread. While looking for any possible issues I found the motor was creating a good amount of vibration. I assumed cheap motor, not balanced correctly. I was planning on doing the iPad vibration app balancing tomorrow, so I pulled...

Difficult to find vibration issue solved on mcpx!

helifreak.com - 2013-04-21 02:48:27 - Similar - Report/Block

After much debate and little conclusion I finally figured out the cause of the excessive vibration. This vibration was very particular. The heli wouldn't vibrate until 1 or 2 packs into flying or after lots of collective pitch changes and then the excessive vibrations interfere with the fbl system. I checked the main shaft, main gear, fea...

SKookum SK- 720

helifreak.com - 2013-02-25 19:36:19 - Similar - Report/Block

For sale a lightly used SK-720, no crashes $240 shipped CONUS Includes SK-720 Power Bus vibration plate wires usb cable. Thanks for looking Attached Thumbnails...

Qestion re tail blow out

helifreak.com - 2013-05-05 13:36:59 - Similar - Report/Block

Preparing for my first flip I tried a few throttle pumps just to check the tail hold. This was in normal mode (not IU). Tail blew out going from hover to near full up throttle. Recovered - non crash. Repeated with same result. Also picked up bad vibration upon recovery. Tightened motor mount and replaced battery. Same thing with out the v...

Tail Bounce Gain Setup with Futaba 10c?

helifreak.com - 2013-02-11 05:01:10 - Similar - Report/Block

So I finally got the mCPx BL yesterday and so far have had 4 flights. I haven't yet tried to dynamically balance the blades, but taking them out and putting them on a balancer they are spot-on from the factory! I also checked the main shaft. It "seems" straight I rolled it on a mirror, but the drill marks made it a bit bumpy so it was har...

Incurable spool up harmonic vibes - am I missing something obvious?

helifreak.com - 2013-06-04 12:49:22 - Similar - Report/Block

I've had 2 130s with 150+ flights and both have been plagued by the dreaded spoolup harmonic vibration, which I've only ever been been able to alleviate but not remove with judicious dynamic balancing of the tail blades with tape. Recently I decided to firm up the whole tail with a Microheli tail case, weighted grips and pitch slider. I i...

Resonance at specific Head Speed

helifreak.com - 2013-05-27 06:46:25 - Similar - Report/Block

Hey Freakers Scratching my head to figure out where to start looking for a resonance/vibration at 2700 rpm. I've a Pro running 16/162 main gear ratio and Jive 100 LV GOV with HS set at 2700,2800,2900. I'm running the original FBL head with the swash follower. When spooling up in normal mode (2700) and lifting of I've a resonance/vibration...

Create UILocalNotification with sound and no vibration

stackoverflow.com - 2012-02-26 06:23:52 - Similar - Report/Block

Is it possible to create UILocalNotification playing a custom sound but not vibrate the phone?...

robird or zyxs??

helifreak.com - 2013-04-25 12:36:15 - Similar - Report/Block

I have. been thinking of getting either. one. does the robird have any current issues? such es pitch up in fff? or drift? I want a system that is notsensitve to vibration. it looks like the zyxhas fixed most or all of its quirks. but maybe more vibe sensitive?...

new 300x owner

helifreak.com - 2013-05-03 05:49:23 - Similar - Report/Block

Hey freaks.. after my 4 flight..this bird has some vibration issue and im not sure what the heck is wrong with it . I am thinking its the way the beastx is located ...its against the frame , did you guys move the beastx on top by the boom? Did that help? Can u guys post picture how your beastx mounted? Thanks...

Raptor 50 and AR7200BX

helifreak.com - 2013-04-21 04:48:09 - Similar - Report/Block

Anyone besides me using a BX on a Raptor? In forward flight it twitches every now and then. I know all the power connections are good so it aint a brownout. I figure its either one of the sensitivity parameters to high or vibration some where. :dontknow...

Double Sided Tape?

helifreak.com - 2013-03-21 15:41:44 - Similar - Report/Block

I have been reading that Scotch 4011 is the preferred tape - it can be removed. I was wondering if there is a reason not to use industrial Velcro? :dontknow It would provided a bit of vibration isolation and you could remove the device for what ever reason. Just wondering.

Presen Timer for Android

androidzoom.com - 2013-04-23 16:07:02 - Similar - Report/Block

kinu This is friend of Presentation. Vibration will work at specified times. Use during exercise also is good, You use it keep in your pocket in a production also is good. FREE...

Mini Vbar instead of Beastx

helifreak.com - 2013-04-20 23:58:00 - Similar - Report/Block

I bought a 300x with no beast and put my Mini Vbar unit on it instead. Upon spool up it flopped on its right side causing the main shaft to break. Is there anyone out there running a mini vbar as well? I am guessing it is a vibration issue.

Silencer for Android

androidzoom.com - 2013-04-20 11:34:54 - Similar - Report/Block

Juan Díaz de la Torre Put your phone from silent / vibration automatically. No more unwelcome sounds during a meeting or during working hours. Schedule as many events as you wish easily. Manage the events individually or in groups. Silencer will handle all this for... $1.29

Baby breath monitor for Android

androidzoom.com - 2013-03-17 11:27:30 - Similar - Report/Block

PentAndroid It is an application for monitoring "apnea" in infants. Counting upon sensing a "apnea".Baby sound and light and vibration to stimulate after 10 counts.Notify an alarm after 16 counts.Can also make a call automatically after 60... $2.10

Deathly vibrations

helifreak.com - 2013-03-17 02:00:22 - Similar - Report/Block

Had a smoooooth flying bird. Lynx updates on tail except the slider and lynx head and microheli swash.... Hp08 Beautiful flying machine. With ds35 mod And had a crash. Lynx output shaft is just so soft that it bends... So basically I didn't have a lynx shaft, and I knew a stock output shaft works, so I replaced that and just for goodness...

Carbon fibre frame reenforcement

helifreak.com - 2013-04-24 20:39:35 - Similar - Report/Block

I decided it was time to do something serious to address the vibration issues related to the weak frame. The technique originates in airplane construction. Fiberglass fiber molted with epoxy. See the pictures: Attached Thumbnails...


helifreak.com - 2013-05-13 09:00:44 - Similar - Report/Block

Hello!!!! thank you for all people that help me!!!! I do make change my tail for vibration OFF!!!! I DO MAKE MODIFICATION 3 PART MY BLADE 400 IT ARE 3 SPACES DI TAIL YOU CAN SEE EXPLODED VIEW BLADE 400..... 1° PART : REFERENCE NUMBER 090 "SPACER 3X4X2.5MM" ....IT BECOME SPACER 3X4X 2MM. 2° PART : REFERENCE NUMBER 095 "SPACER 3X4X3.1MM"...

Body vibrations and tail bounce

helifreak.com - 2013-04-16 06:34:01 - Similar - Report/Block

Hey, I just got a MCPX BL and i see that the tail is so bouncy! Iv tried all the gains possible and still bounces when i give rudder left or right. Then i realized that it vibrates a lot. The "Blade" sticker on canopy is blurry when hovering, so Im guessing i have too much vibration? Ive tried the other set of blades and still vibrates. a...

Exciting Bubbles for Android

androidzoom.com - 2013-04-25 16:41:40 - Similar - Report/Block

Fisaines The most realistic simulation of bubbly polyethylene you ever seen! Hundred square miles of bubbles for crushing and pushing. Awesome sound and vibration effects! Take the challenge and go phut 'em all! FREE...

Sound mode switcher for Android

androidzoom.com - 2013-03-06 11:48:00 - Similar - Report/Block

MarkYQJ Set your time interval and the sound will be switched automatically to standard, silent, or vibration FREE...

700v3 black main gear

helifreak.com - 2013-03-23 05:21:58 - Similar - Report/Block

I noticed my black main gear is not perfectly round. Their is no gap between it and motor pinion on part of it. Anybody else have this issue? Also could it cause vibration enough to mess with 3gx unit?...

Love Hate HP08

helifreak.com - 2013-05-06 05:13:26 - Similar - Report/Block

I love the power, runtime and weight savings, but this motor has been a pita. It developed an intermitant vibration that would mess with the gyro. The cause of the vibe showed up clearly today. The silver can came loose from the black end cap. It wobbled enough to knock 2 magnets out. I plan on using CA to glue the magnets in and Locktite...

sk data viewer

helifreak.com - 2013-03-04 00:46:22 - Similar - Report/Block

Hello I am trying to view my vibration log on my 720 but all I can bring up are the acceleration freqs. I have version 1 and can view last flights overall vibs in the set up software but cant get vibs on data viewer do I have to pay for a key to get all the logging features? thanks...


Fill out the form you see below. Registration is free, fast and simple.
If you are already registered, sign in page login.

Web Site :
Required Field
First Name :
Required Field
Last Name :
Required Field
Email :
Required Field
Sex :
Required Field

evolveStar.com is free for ever !

evolveStar.com provides a search engine that allows you to gather information to write their own blog.

evolveStar.com enhances the sources displaying the logo of the site.

If you want to remove your site or you believe a site listed infringes copyright, please report it to: info@evolvestar.com

Specifies the subject copyright violation and the url of the page

evolveStar.com respecting the law DMCA (Digital Millennium Copyright Act) will immediately remove whatever its merits.

Next will be effectual and relevant checks.

Who We Are Partner Advertising Contacts Privacy terms Help & FAQ

© Copyright 2010-2017 Fabrizio Fichera. All rights reserved.