Do you need to disassemble a clearo at the end of the day?

e-cigarette-forum.com - 2013-04-22 08:34:10 - Similar - Report/Block

**Don't know why I still can't post on other forum even though I have 6 posts already. Oh, well!** Newbie question - and very probably a stupid question. If I don't finish vaping all the juice from the clearo tank at the end of the day, can I just leave the whole thing alone overnight or do I need to take apart the clearo tank and take th...

Has anyone tried this Clearo on an X2 batt?

e-cigarette-forum.com - 2013-04-22 10:53:02 - Similar - Report/Block

Anyone have first-hand experience with this rebuildable clearo "Redux Replaceable Coil eGo Clearomizer" from Smok Tech ? If so, does it fit on an X2 batt just as good as the SI ones do? Since SI is discontinuing their 1.6mL clearos, I was looking for a replacement instead of the T3's or T3 minis. I like the form factor of the clearo...wit

Visions Stardust Clearo's- Are they marked?

e-cigarette-forum.com - 2012-09-21 15:46:55 - Similar - Report/Block

I got a few clearo's mixed up last night and now don't know which is which. I do not have a multimeter so are these things marked or anything? Thanks, Charlie...

Question: Is it the lower the ohms, the more juice u will use, and vica versa?????

e-cigarette-forum.com - 2013-05-09 04:48:04 - Similar - Report/Block

I'm really not into the electrical part of this, but I am trying to learn. I just thought of this question and knew there had to be a ton of brilliant vapers (and I'm not throwing the word around lightly. There def r BRILLIANT vapers) vapers out there that know the answer. If I put the same exact juice, uh 3.0mL in a 1.8 ohm clearo and a...

Disassemble 750MX?

helifreak.com - 2013-04-12 01:47:32 - Similar - Report/Block

I want to take the can off my 750mx to see if any debris got in when I cut my shaft.(for Goblin) Thought I would have the best luck on finding an answer here. I can't find how to disassemble the 750mx. I see two small set screws inside at the top of the can. Is this what holds the can to the shaft? Do I just unscrew them and pull the can...

Best clearo/tank to use with VAMO V2?

e-cigarette-forum.com - 2013-04-30 15:20:56 - Similar - Report/Block

Recently acquired a VAMO and until now have been using 801 Fusion cartos. They're working pretty nicely, but I figure I can get a step up in flavor as well as saving time on dripping into the carto every 15-20 minutes to keep it wet by switching to a clearo and/or tank set up. However, I seem to be running into brick walls with almost eve...

Disassemble an OpenCL kernel?

stackoverflow.com - 2011-07-14 08:25:30 - Similar - Report/Block

I'm not sure if it's possible. I want to study OpenCL in-depth, so I was wondering if there is a tool to disassemble an compiled OpenCL kernel. For normal x86 executable, I can use objdump to get a disassembly view. Is there a similar tool for OpenCL kernel, yet?...

Battery Problem: Volt X2 'Passthrough'

e-cigarette-forum.com - 2013-03-26 01:08:07 - Similar - Report/Block

Hi, thanks for reading this thread. I recently placed my second order from smokeless image for some more cartos/clearos, after much anticipation and delays, it seems that my first clearo wasn't what was causing my problems. It seems though the battery is fully charged, with either clearo or carto, it's pulling when fully threaded on, just...

Brand NEW iClear30 3.0ml 16 wick Dual Coil Top Coil Clearo Tank - Innokin Challenges Nova Dominance!

e-cigarette-forum.com - 2013-05-06 04:53:11 - Similar - Report/Block

Innokin iClear30 3ml 16 Wick Clearo Tank Dual Coil 2.1 ohm Presenting the brand new Innokin iClear30! This is a well performing top coil clearo tank that features a 16 wick design for less possibility of juice burn. A silicone condom that inserts over the wicking helps prevent atomizer shift when installing new replacement heads The iClea...

Coffee juice tastes bad after a day in the clearo.

e-cigarette-forum.com - 2013-03-25 18:38:21 - Similar - Report/Block

All my coffee flavors are awesome... the first day in the clearo. Seems like they always get dark, thick, and less flavorful by the next day. And this seems to happen whether I have it in a Vivi or a CE5. Is this just me? My juice? Or do coffee juices just not stay fresh? Fairly new. Any suggestions?...

Dark juice clogs cartos and clearo's

e-cigarette-forum.com - 2013-03-20 06:53:13 - Similar - Report/Block

I love coffee but its dark and clogs my carto's and clearo's Someone said to cut it with something Any idea's ? Thanks Larry...

RCM BL450M Motor question..

helifreak.com - 2013-02-22 04:15:49 - Similar - Report/Block

I was wondering how to disassemble this little motor.. I changed the OWB on my 450 Sport V1 hoping it will solve my vibrations problem quoted on an earlier post i made with some videos attached to it, turns out i changed almost everything on the transmission/power gears in the heli, i changed the OWB, Main shaft bearing blocks, tail drive...

evolveStar Join

Is my Vamo defective or broken ?? Atty checker is wrong 50% of the time

e-cigarette-forum.com - 2013-05-04 13:38:12 - Similar - Report/Block

Hi all I got a VAMO a couple days ago and im debating whether to contact smoktek about this problem. When I screw on a clearo I and press the atty checker button I get impossible readings such as 0.1 or .7 or 3.7 on a verified with DMM atty . Often times I will need to unscrew the clearo and screw it back on several times to get it to re...

My e-liquid is tasting different in different devices

e-cigarette-forum.com - 2013-04-09 18:27:02 - Similar - Report/Block

The last few days I've been vaping Caramel Apple using a CE4+CC clearo, and today, for the first time (for the sake of convenience), I filled one of my Vivi Nova 3.5ml tanks with the stuff, and it tastes completely different. Not bad, just different. My Vivi Nova has the same 2.4ohm coil that's in my clearomizer, and I've vaped it at ever...

I need a Glass CE5 Clearomizer

e-cigarette-forum.com - 2013-05-24 12:22:07 - Similar - Report/Block

Hi, I have an eGo CE5 which has 510 threads. I've ordered some juice from Mt. Baker Vapor and waiting on these being delivered. But I just noticed a warning on their juice descriptions that state "Don't use this juice with plastic Clearos as it will damage them". Now, I'm not a fan of Cartos or tanks. I like Clearos, I currently have 5 Cl...

App to investigate and identify A2109 components and capabilities?

androidtablets.net - 2013-03-24 17:17:42 - Similar - Report/Block

The more we understand something, the more we can abuse it in ways the maker never intended... What app can we use to plumb the hidden depths of the A2109? Detect and identify chip / components / profiles / whatever? Like query JB and ask what Bluetooth profiles exist, instead of idle speculation? Accelerometer? Component versions? (like...

Clearo colour issues

e-cigarette-forum.com - 2013-03-19 02:14:31 - Similar - Report/Block

Just got my clearos in the mail from SI. I really like the style with the "Volt X2" etched into the plastic and the "Smokeless Image" logo etched in the aluminum ring. However, I ordered "blue"... in the pictures it is clearly a regular blue, but I got a rather feminine looking baby blue clearo instead. It works fine, but I'm not a fan of...

Clearo's, carto's, RBA's? help!

e-cigarette-forum.com - 2013-03-14 08:46:36 - Similar - Report/Block

Hello folks my name is Seth and I'm somewhat new to vaping..last time I did was over a year ago when my Riva broke. Since then, sadly I'm back on analogs. But I finally am going to have enough to drop on a VAMO. I've figured out what batteries I'm getting and am gonna try Mtbakervapor for liquid (how is the on their liquid?) I always had...

Kanger T3 'mini' vs Kanger eVod

e-cigarette-forum.com - 2013-02-05 15:57:55 - Similar - Report/Block

I currently have the kanger t3 but cannot get it to work properly. I either get dry hits, so I remove one of the two 'loose' wicks from the head, and then it floods, gurgles and spits at me. Annoys me so I have gone back to the Innokin iClear DCT Clearo atm. Still looking to get a new bottom coil clearo though. I'm deciding between the Ka...

CE4 / Vision / V3 & airflow issues?

e-cigarette-forum.com - 2012-08-04 11:14:32 - Similar - Report/Block

Im having a big problem with those clearomizers... Im using an Ego Twist / Ego T battery, and seem to find it very hard to drag those clearo's... when they are not connected to the battery, the airflow thru them is great, but just after the first screw twist, in order to connect them to the battery, and flow drops by 60-70%, and if screwe...

Leaky Clearos

e-cigarette-forum.com - 2013-04-20 09:35:13 - Similar - Report/Block

I started out my ecig journey after purchasing and ego-t starter kit with a ce5+ clearo, this clearo was the type that could have the atomiser changed to save a bit of cash here and there but after a couple of days it started to leak everywhere from the bottom so i got a non replaceable one instead. then i saw a chinese site selling repla...

alternative to carto tank for cracking juices??

e-cigarette-forum.com - 2013-05-02 04:19:07 - Similar - Report/Block

This is probably a very noob, uneducated question, but I'm wondering if I have to use a carto tank, whether it be glass, polypro, or metal for the citrusy cracking juices. I've been using a clearo up until getting a bunch of new juices and just like how easy it is.....fill and vape....clean out every other night....just so easy. Now I'm s...

Kanger T3 bottom coil replacements?

e-cigarette-forum.com - 2013-02-26 00:25:07 - Similar - Report/Block

Does anyone know of a U.S. supplier that has replacement heads for Kanger T3 b.c. (2.4 ohm) clearo's in stock? None of the companies I'm familiar with have them right now. Thanks! :) Bren...

Testing servo components

helifreak.com - 2013-01-31 07:17:36 - Similar - Report/Block

I have been having a clear out & i have a 8717HV servo that I stalled some time ago. I decided to disassemble it for spares. Obviously one or more of the components are damaged, does anyone know of a way of testing the various parts to find out what is damaged? Attached Thumbnails...

Are these juices safe for a clearo

e-cigarette-forum.com - 2013-03-21 01:26:14 - Similar - Report/Block

Just want to make sure before I toss them in one of my clearos and I get disappointed. I have a metal tank sleeve coming in for my nova if I need to use it i have ordered From MBV Black ice cinnamon bun From AIV frost Blossom crunkberry zombie apocolypse...

What Resistance V2 for a 3.7v battery

e-cigarette-forum.com - 2013-02-20 14:36:18 - Similar - Report/Block

I'm new to this vaping but liking it pretty good. I want to order some extra clearos for other flavors but I need to know what resistance they should be. This stuff gets very technical it seems, unless I'm making it more difficult than it is??? I have an ego VV 650mah, it came in a kit with a clearo but I don't know what Ohm it is. Thanks...

Eliminate hotspots?

e-cigarette-forum.com - 2013-04-09 08:02:28 - Similar - Report/Block

I've got an AGA-t2. The coil looks perfect but I can get a hotspot at the bottom to go away. I've tried every position with it. There is nothing I can do to get it to go away. I don't understand what I'm doing wrong. I've watched videos on it and mine looks exactly the same but it seems they can fix hotspots in 5 seconds. I don't see why...

What to go with an evic? - Tank, clearo, etc

e-cigarette-forum.com - 2013-02-21 15:00:36 - Similar - Report/Block

Hello everyone, So I have an evic on the way, and is my first mod. As such, looking for something to go with that would compliment it nicely but don't want to drop a fortune on a tank/ atty . I know the Kangers will work, but looking for something more asthetically pleasing. Any suggestions? Thanks!...

KANGER Protank vs Innokin iClear 30

e-cigarette-forum.com - 2013-04-26 08:51:31 - Similar - Report/Block

I will be buying/using an eGo Twist.(for now) Which would you guys recommend? Bottom coil addy or would a dual coil clearo be better with a Twist?...

dry burn = aweful burnt taste

e-cigarette-forum.com - 2013-03-22 11:06:18 - Similar - Report/Block

I am somewhat new to clearo's and tried a dry burn with one. I pulsed it till the coils were glowing and the wick looked white again but now it has a really foul burn taste. Did I burn it too much or too little?...

Assembly language for Reverse Engineering

stackoverflow.com - 2012-03-31 01:13:29 - Similar - Report/Block

What should I choose NASM or MASM for learning assembly. I want to learn assembly, motivation being Reverse Engineering. So that when I disassemble some executable, I can understand the code by looking at disassembled code.

Cartomizers and Clearomizers only seem to work with fruity flavors

e-cigarette-forum.com - 2013-04-18 18:08:25 - Similar - Report/Block

Anyone else have this experience? Seems the darker flavors like cappucinio, butterscotch, RY4, etc just taste burnt. While fruity flavors come through very well. Vaping 3.7 volts with a 1.5ohm or 2ohm dual coil clearo or tank.

For Sale: Basketball Ring Set (Bargain sale!)

istorya.net - 2013-05-04 15:07:33 - Similar - Report/Block

Hey guys, Just want to know if anybody is interested in a basketball ring set. It's been with me for a couple of years already, very functional, just cosmetic blemishes since this is placed outside. Its height is adjustable up to 8ft, and it comes with the box. I think the manual is lost but it's very easy to disassemble and assemble. Ite...

My request to Vision to create the best clearo

e-cigarette-forum.com - 2013-04-10 03:25:22 - Similar - Report/Block

Dear Vision R&D, You are probably working on this right now, but i think a glass V3 with a 2.2 or 2.4mL capacity would be a huge success. I have two V3s and they are my favorites, lovely vapor, great taste, and no leaks! amazing, and could be more amazing in a V4. Thank you Richard...

Quel Clearo démontable pour mon Ego T ?

forum-ecigarette.com - 2013-02-27 15:49:52 - Similar - Report/Block

Problèmes d'utilisations, Questions et Conseils Bonjour, J'ai besoin d'aide et de conseils pour choisir un bon clearo pour mon Ego T. J'ai acheté des Clearo CE5 sur le site Vapoteuse qui sont démontables avec des résistances de rechange. Et grosse déception au niveau du hit par rapport ... plus ... Statistiques : 17 Réponses || 83 Vus Me...

petit problème sur clearo

forum-ecigarette.com - 2012-09-29 16:43:32 - Similar - Report/Block

Problèmes d'utilisations, Questions et Conseils Salut Sur un de mes nouveaux clearomyser j'ai un rond en caoutchouc/latex blanc qui a bougé (descendu) cela peut poser problème ? je pense que j'ai du le faire descendre en rechargent le clearo d'avance merci plus ... Statistiques : 13 Réponses || 81 Vus Message de VaporxSun...

Quel clearo avec un VAMO ?

forum-ecigarette.com - 2013-06-04 20:48:37 - Similar - Report/Block

Discussions générales autour des mods Bin, ça y est, je viens de commander un Vamo V2... A force de vous lire, vous avez fini par me faire envie Mais j'aurais besoin d'un petit conseil : quel clearo serait sympa ... plus ... Statistiques : 7 Réponses || 69 Vus Message de belligou...

Longueur Ego 650 + tank VS Kanger EVOD + clearo EVOD BCC

forum-ecigarette.com - 2013-06-11 23:47:36 - Similar - Report/Block

eGo Salut Est-ce qu'un membre possédant une ego Tank (classique) et une Ego C ou T avec clearo pourrait m'indiquer la longueur de la cigarette AVEC le tank ou le ... plus ... Statistiques : 1 Message || 41 Vus Message de aganim07...

joint silicone

forum-ecigarette.com - 2013-04-11 19:29:14 - Similar - Report/Block

Problèmes d'utilisations, Questions et Conseils bonsoir, j'ai perdu le petit sur un clearo ce4. est ce que ça se trouve? merci plus ... Statistiques : 2 Message || 38 Vus Message de philip...


forum-ecigarette.com - 2013-02-25 18:38:59 - Similar - Report/Block

Problèmes d'utilisations, Questions et Conseils BONJOUR A TOUS J'ai essayé ce clearo, cette fin de semaine, et résultat des courses , il a fuit au bout d'une journée. Je voudrais avoir l'avis de vapoteur l'aillant déjà utiliser ! plus ... Statistiques : 3 Réponses || 29 Vus Message de gexk8...


Fill out the form you see below. Registration is free, fast and simple.
If you are already registered, sign in page login.

Web Site :
Required Field
First Name :
Required Field
Last Name :
Required Field
Email :
Required Field
Sex :
Required Field

evolveStar.com is free for ever !

evolveStar.com provides a search engine that allows you to gather information to write their own blog.

evolveStar.com enhances the sources displaying the logo of the site.

If you want to remove your site or you believe a site listed infringes copyright, please report it to: info@evolvestar.com

Specifies the subject copyright violation and the url of the page

evolveStar.com respecting the law DMCA (Digital Millennium Copyright Act) will immediately remove whatever its merits.

Next will be effectual and relevant checks.

Who We Are Partner Advertising Contacts Privacy terms Help & FAQ

© Copyright 2010-2017 Fabrizio Fichera. All rights reserved.