|
|
helifreak.com
- 2012-09-06 22:32:56
- Similar
- Report/Block
Hello fellow helifreakers. I have another motor mod to show and tell about which is about the Hpo6 2s 8200kv motor. I find this motor good to run on a secondary 130x or for the guy that don't like cutting on their heli frames. This motor has plenty of power to pull off nice loops rolls invert flight good old fashion sports flying. As for...
|
|
|
helifreak.com
- 2013-03-17 02:45:06
- Similar
- Report/Block
Before I begin, I just to state that the 130x is a great helicopter out of the box. I'm just the one of those people that likes building/modding aircraft. I've got 2 130x's, 1 is a 7.4v with stock servos/3 in 1, hp08. 2 is a 3s I'm working on with HXT 500 cyclic servos, an INO labs digital Naro-D for tail, ZYX-s gyro, XP12a esc. The only...
|
|
|
helifreak.com
- 2013-05-24 04:20:19
- Similar
- Report/Block
Lynx has come out with a motor just for the 130x! 8350KV, I'm sure this thing will be a monster! http://www.lynxheli.com/product_info...d ucts_id=22931...
|
|
|
|
helifreak.com
- 2013-05-05 07:39:49
- Similar
- Report/Block
Saw this newer motor from Turbo Ace for the 130X. They are on sale for $29 so I ordered one up. I figured it would just be a new version of the hp08 but it is larger in diameter and has a thicker shaft. The end is turned down to fit a standard pinion. I only got a few flights on it today and it is a very strong motor at 85%. It came with...
|
|
|
helifreak.com
- 2013-04-11 06:20:45
- Similar
- Report/Block
Hello Up for sale is a brand new Spin brushless motor for the 130x. I have never used it, the pinion/bolts are still in their bag. I would like to get $33 for it, which includes shipping with US and Paypal fees. Please note that I only check my emails in the evenings, so ... first $33 takes it. cheers Attached Thumbnails...
|
|
|
helifreak.com
- 2013-03-11 04:00:52
- Similar
- Report/Block
Here are some spare parts left over from my Blade 130X 2 sets B130X17-R Xtreme BLADE 130X Tail Blade Red 130 X 9.38 (New) 2 sets B130X15-R Xtreme BLADE 130X Tough Main Blade Red 130 X 13.40 (New) 1 BLH3721 Tail Pushrod Support/Guide Set: 130 X 4.54 (New) 1 BLH3719 Blade Torque Tube 7.84 (New) 1 BLH3726 Tail rotor pitch lever set 130 X 7.2...
|
|
|
helifreak.com
- 2013-03-14 05:52:40
- Similar
- Report/Block
I just flew my 130x today for the first time and loved it! However, it does feel a little underpowered. I'll be looking to get an upgraded motor and would like it to 'feel' like a bigger hp05 mcpx. Thoughts?...
|
|
|
|
helifreak.com
- 2013-03-19 03:05:02
- Similar
- Report/Block
hi, someone suggested that i get an hp08 motor for my blade 130x. my helicopter doesnt have much power to save itself from hitting the ground sometimes, and i also want it to be able to flip and roll faster. it feels alittle dosile to me compared to the big helicopters on the simulator. my question is: will the hpo8 motor help with these?...
|
|
|
helifreak.com
- 2013-04-20 04:36:16
- Similar
- Report/Block
Sup fellow freakers? I decided to part with my 130x and have these brand new stock servos which im parting with as well and decided to sell em in a lump for a much reduced price to my fellow freakers... 8 cyclic and 2 tail servos.. a $170 value for $130 free shipping in conus.... Happy flying :peace Attached Thumbnails...
|
|
|
hometheatershack.com
- 2013-03-12 22:50:23
- Similar
- Report/Block
i was hoping to get some thoughts about these two projectors. I had my mind set on the Epson 8350 but just saw the Optoma HD8200 for about $300 more than the 8350. From what I've read it seems like the 8200 is a little higher end but a little older. I've read (and seen) great things about the 8350 but know nothing about the 8200. This pro...
|
|
|
helifreak.com
- 2013-03-24 00:03:42
- Similar
- Report/Block
I'm curious how these two will compare in flight. I'll report back once I've had a chance to give them both a go side by side:thumbup: The 130x is running the stock high perf blades and will be getting an hp08 installed soon and will compare then. The mcpx has the 130x bullet blades with hp06v2 and nanocpx tail motor. They are both exactl...
|
|
|
helifreak.com
- 2013-04-12 05:19:39
- Similar
- Report/Block
Just purchased a spin 8000 from a fellow member. Anything I should be aware of before I install it? What pinions and batteries are people having the best luck with. I have been pretty happy so far with my 130x after some mods and upgrades, but I have come to the point where Im getting somewhat bored of the performance with the stock motor...
|
|
|
|
eteknix.com
- 2013-05-29 09:54:41
- Similar
- Report/Block
Mionix, the Swedish manufacturer of professional high- end gaming accessories, today unveiled the new AVIOR 8200 high performance ambidextrous gaming mouse. “We developed the AVIOR 8200 to offer maximum customization and engineered with the best technology. Whether you are right or left handed, use a claw or palm grip, we have created the...
|
|
|
helifreak.com
- 2013-03-19 06:21:38
- Similar
- Report/Block
I couldn't get much lift at all on a handful of batteries so I think my main motor is dying. Blades are level at mid-stick so I'm pretty sure it's the motor. I have a spare motor but haven't replaced the original one yet. Is it as simple as disconnecting the plugs above it and then taking out a screw then the motor? Looked for a repair vi...
|
|
|
helifreak.com
- 2013-02-20 11:42:15
- Similar
- Report/Block
Hi, has anybody tried the XP12 external ESC with 130x stock motor? is anybody so kind to post for me his ESC set up .ini? thanks, Luca...
|
|
|
helifreak.com
- 2013-04-25 04:48:23
- Similar
- Report/Block
Want to buy a HP10 for one of my 130x, low flights or NIP preferred. I could care less if a motor plug is on it as I am gonna direct solder it anyway. PM me if you got one you wish to sell. Thanks...
|
|
|
helifreak.com
- 2013-04-19 04:31:07
- Similar
- Report/Block
Hi guys, I installed the HP08S motor last night and now my heli shakes. I have the red rubber grommets on but still shakes. Any suggestions? It didn't shake with stock motor. Thanks...
|
|
|
helifreak.com
- 2013-02-13 07:06:24
- Similar
- Report/Block
So after upgrading my 130x with Microheli parts over september/october I decided to build another one since it was only another 90$ worth of parts for another complete airframe. It's extremely responsive (I can reduce the expo for more zippy behavior) and the tail holds quite well. The main problem I've got is this stock inrunner motor th...
|
|
|
|
helifreak.com
- 2013-04-19 05:40:23
- Similar
- Report/Block
Hello. After flying my 130X a few times I have decided to modify it, a little at first with some aluminum parts, then a bit more with more aluminum parts and a new motor, then more with the tarot ZYX-S, and finally completely build a heli out of aftermarket parts, which is what I got here as my final version. I guess it isn't really even...
|
|
|
helifreak.com
- 2013-04-09 16:45:23
- Similar
- Report/Block
I have a 130x with a solid 3-in-1, main motor, tail servo, and two cyclic servos. It also has the third cyclic servo, which functions, but is held together with hot-glue. So far as I know, frame and rotor-head are good. The tail is trashed though. I got fed up trying to hunt down tail-wag, and while rebuilding the tail, the tail gears I g...
|
|
|
helifreak.com
- 2012-08-25 19:59:43
- Similar
- Report/Block
I have the walkera MH slider in my heli now and received my 130x MH slider(ordered the 130x slider when I thought the walkera was lost in the mail) my question is that would there be a reason to switch to the 130x one, or should I sell it? 130x stock MCPx - Sold Sent from my iPhone...
|
|
|
|
helifreak.com
- 2013-03-14 05:12:24
- Similar
- Report/Block
I just bought one after months of going back and forth... I now have a bl nano, stock mcpx, hp06v2 bl mcpx v1, 130x:bananaand 300x. I use the nano indoors, the stock mcpx for learning inverted flying, the bl mcpx is my fully custom stunt bird - super fast and fun, but def not for a beginner:wow2:, the 300x is my 'big air' bird, but I just...
|
|
|
helifreak.com
- 2013-04-10 09:21:31
- Similar
- Report/Block
mint hp08s with only a few flights with nip xtreme reinforced motor plate. was testing various motors for my 130x and sticking with the hp10s. $35 shipped conus, paypal to confirmed addy. thanks, joe Attached Thumbnails...
|
|
|
helifreak.com
- 2013-05-29 05:04:04
- Similar
- Report/Block
Im selling a used blade 130x with parts and batteries :Bang The skid tips are broken and the vertical fin too 1 Blade 130x in good shape Upgrade metal umbrella gear Upgrade metal tail rotor pitch slider Spin 8000 motor 1 Celectra charge and plug 2 Eflight 2s 300mah batteries in great shape with micro deans connector 9 Gens Ace 2s 450 mah...
|
|
|
|
helifreak.com
- 2013-05-06 03:20:08
- Similar
- Report/Block
I'm posting for an older friend. He has an older style Align 250 that is belt drive. It flies well using it's all stock setup (ESC, motor, servos, 750 gyro, etc). It has 2 lipo packs and a Spektrum rx making it BNF. There is a minor twitch in one cyclic servo on the bench, but it is not noticeable in flight. He bought this 250 to transiti...
|
|
|
helifreak.com
- 2013-05-03 02:26:22
- Similar
- Report/Block
this motor with a 10tooth pinion gear its a beast with a hyerion 500mah pack is a beast the tail holds so much better then stockthe heli is locked it full time. the heli feels lighter too i love little motor alot better then stock by far. im loveing this 130x now:peace:peace...
|
|
|
helifreak.com
- 2013-02-11 03:43:37
- Similar
- Report/Block
Selling my 130X with original packaging, battery, tool, docs, etc. and comprehensive spare parts inventory for $240 via PP, shipped to continental U.S. I bought my 130x to train for a Trex 600 EFL Pro and now I have it. 130X must go. Heli is stock except for conversion to aftermarket lipo - Sky Lipo 350 MAh (six included). Stock Battery a...
|
|
|
|
helifreak.com
- 2012-07-28 03:05:43
- Similar
- Report/Block
Bought a brand new 130x today from LHS. Never flown. When I bind it to the radio DX6 I get full control of all servos and motor and then suddenly everything goes dead and there is no control (this is before spool up). The heli still has power before and after because I can hear the servos twitching but there is no response to any of the c...
|
|
|
helifreak.com
- 2012-09-02 00:36:19
- Similar
- Report/Block
My 130x is on its 3rd main board (HH is looking at it). I love the 130x and fly in a 40'x40' space in my back yard doing mostly flips, rolls, inverted and some sloppy tic-tocs. Now I am toying with the idea of buying another 130x and using the current one for spare parts OR biting the bullet and getting 300x. The 130 is the biggest heli I...
|
|
|
helifreak.com
- 2013-03-25 07:17:56
- Similar
- Report/Block
Hey guys I am looking for a used HP08s/10s or Spin 8000/8800 motors for a 130x. Any extra pinions would be nice too. I also looking for metal tail gears if you have any. I prefer only blade metal tail gears or lynx.
|
|
|
|
helifreak.com
- 2013-03-11 02:54:08
- Similar
- Report/Block
Suddenly i only have throttle control. Lost rudder, cyclic, pitch ect. new 130x dx8 I have updated firmware, downloaded 130x setup...
|
|
|
helifreak.com
- 2013-03-14 15:35:10
- Similar
- Report/Block
I've been trying for a while to see if I could get to do a proper autorotation on my 130X. I've got the Xtreme OWB for the 130X, ie. this .. Xtreme Productions Auto Rotation Gear Set 130X B130X08 ... but everyone up until now has told me that the 130X doesn't have enough inertia in its blades to properly auto-rotate (ie. from around 150fe...
|
|
|
helifreak.com
- 2013-06-09 03:14:48
- Similar
- Report/Block
2 blade 130x forsale $400.00 shipped first one is all stock needs board second one is complete mircoheli needs servos and board with lynx dfc and extreme metal gears a b c and d and turbo ace 908 brushless motor 3 working ds35 servos was from for mh frame 6 450 mah lipos one extra microheli frame blades screws stuff like that will include...
|
|
|
|
helifreak.com
- 2013-06-07 05:21:10
- Similar
- Report/Block
Any issues with using main blades from 130x with MCPX BL stock motor and nano tech 300 mah lipos? Wonder what are the advantages/dis-advantages of using longer blades?...
|
|
|
helifreak.com
- 2013-06-04 01:47:51
- Similar
- Report/Block
For sale is my upgraded 130X. I really love this little heli but I need the money to fund my next heli, a Logo 600SX! I believe I have built the best flying 130X. Not only does it fly stunning but it has retained its crash durability and lightness by keeping plastic parts in important areas. In addition to that flight times are easily 4.5...
|
|
|
helifreak.com
- 2013-02-25 03:14:05
- Similar
- Report/Block
I have a blade 130x with upgraded head and brand new 3n1 fbl board. (I will include the other but, it only controls the servos. If you run it up the motor cuts out right away) Comes ready to fly outta the box. Has extra parts seen in pics. No bad habits. No vibrations. asking $120.00 obo 5 batteries included (one in heli already) 1 celect...
|
|
|
|
helifreak.com
- 2013-04-17 03:47:32
- Similar
- Report/Block
Nicely upgrade 130x, the pics say the most about it, Fusuno CF Canopy :noteworthy. All new, only had 2 flights on the motor and 3-4 with everything else upgraded and maybe no more that 10 flights when it was all stock. Bought in January new! I am selling it because the HP10s is too much motor for me so I decided to keep my other one which...
|
|
|
helifreak.com
- 2013-03-29 05:56:44
- Similar
- Report/Block
After flying a few awesome flights today, I decided to direct solder the motor wires to the esc wires. I did this because the 130x was having a hard time starting up sometimes and thought it would also give a bit more juice. I've wired up professional recording studios, etc...plus I've built a few bl mcpx's so I'm pretty familiar with it.
|
|
|
helifreak.com
- 2013-03-03 22:42:29
- Similar
- Report/Block
Selling everything due to neighbors truck rolling into house and need a gargage door while lawyers fight his insurance. Has been over six weeks and I can't wait any longer to secure my house better than the tarp that is zip-tied to rails. McpxBl = $175 All stock and comes with 2 e-flight batteries 130x = $325 Every bit of MicroHeli bling...
|
|
|
|
helifreak.com
- 2013-05-05 07:53:46
- Similar
- Report/Block
Coupla quick questions for you guys 1.Ran it today on full pack until (evc) lost power and descended..blinking blue light. it was awfully warm battery and motor seemed burnable..lol..very hot tho!! 2. Is there a motor I can use thats slightly better and just plug and play.. dont know how to solder and have no wish to learn. 3. Slight tail...
|