Quantcast








     

Blade Tracking. How good is good enough?

helifreak.com - 2013-04-19 23:50:55 - Similar - Report/Block

It seems I have a blade tracking issue. After a crash repair my tracking is off about 1/2 the thickness of the blade. Would you fix this or fly it?...

How do blade grips cause vibes

helifreak.com - 2013-06-05 00:41:03 - Similar - Report/Block

I have had this happen about three times now. After a hard crash either on asphalt or if I didnt hit TH in time, I get bad vibes. Check/replace FS even though it looks fine, Main Shaft is fine, main gear is fine. Finally get down to the only thing left (I swap parts between two MCPXs), it turns out to be the blade grips. Curious as to wha...

Blade tracking/flutter

helifreak.com - 2013-05-05 03:23:17 - Similar - Report/Block

Need some advice. I tipped on take off last weekend. Went through the bird today and rebalanaced my main blades and got the CG matched. The main shaft had a very, very slight bend so it got replace. fethering shaft was straight with my test leaving one blade on and rotating the shaft. I had a slight blade tracking issue so I adjusted that...

Nano CPX blade tracking off at positive pitch

helifreak.com - 2013-06-02 06:48:19 - Similar - Report/Block

Hi, Am quite new on the heli scene, just able to hover and fly around a nano cpx. Recently crashed and is having bad vibrations. Upon closer inspection, here is what i noticed: 1. At low throttle, blade tracking is off about 1mm, but I have been able to fly with no problem 2. After a bad crash, at just beyond the position of throttle stic...

Auto Tracking in Gujarat - GPS Tracking Solutions for Tracking Auto's

sooperarticles.com - 2013-06-11 18:15:35 - Similar - Report/Block

Autos are an important part of transport system all over India. Auto tracking in Gujarat has become a common practice today! The tracking system uses Global Positioning System in determining the position of an auto rickshaw.

Happy with HH

helifreak.com - 2013-02-21 04:05:57 - Similar - Report/Block

So I recently posted about maybe just dropping HH and blade altogether after different malfunctions causing crashes. Well good news they fixed my 300X and all the parts free of charge and its on it way back. I purchased a second 300X now that I know how to fix all the vibe issues ETC. Good service over at HH and I will continue to purchas...

HC3-SX, Blade 450X and DX8: Any advice?

helifreak.com - 2013-03-21 17:19:43 - Similar - Report/Block

hi, i am thinking about getting the hc3-sx for testing with my stock blade 450x and dx8 - although the hugh price hurts. but i am a little afraid, that i can not manage all those settings of the hc, because i do not understand every single detail about all these settings. i have read, that the the dx8 does not seem to be the best for the...

Hk 250 SR conversion

helifreak.com - 2012-09-15 14:22:03 - Similar - Report/Block

Hey fellow freaks I bought an hk 250 to use with all my SR electronics. So far so good. I was just wondering why the main gear has another gear sprocket under the main gear? Attachment 349539 Blade Sr, Blade 450 3D,Blade 450 X,DX6I, Phoenix V4 Attached Thumbnails...

Polsilver Super Iridium!

badgerandblade.com - 2012-09-02 14:26:08 - Similar - Report/Block

Just had my first shave with the polsilver super iridium blade and I love it.Ordered them from Phil at Bullgoose.Great service.I can see why when these blades were thought to be discontinued so many here were upset.This blade was smooth and sharp and soooooo forgiving,that if I was one of you guys that used this blade I would have been sa...

hello, help with pitch curves...i am stuck on this one!

helifreak.com - 2013-03-15 05:51:28 - Similar - Report/Block

Hello I had recently crashed my heli fixed everything up I did the whole beast x set up again. I have a problem though when hovering it doesn't get off the ground til one notch after mid stick. Before it used to right before mid stick. Now I know this is good for learning 3d but I'm no where near that Lol so I'd imagine head speed would b...

G500 Build Finished, It Flys!!!

helifreak.com - 2013-05-27 00:38:50 - Similar - Report/Block

:bacon I finished my G500 build last night, made some final tests by putting it on my turntable. I spooled it up and all seemed good. Blade tracking looked good and tail control was correct. Long story short, it lifted off and hovered nicely, and oh that Goblin sound. My thumb and fingers were shaking pretty bad so I landed. I was testing...

Sorry the application has stopped unexpectedly android

stackoverflow.com - 2012-05-28 22:22:32 - Similar - Report/Block

Can someone please tell me how to fix my problem? I'm building my first android app and below is the error codes I get when application is launched in Emulator. Thank you 05-29 02:55:33.970: WARN/dalvikvm(598): threadid=1: thread exiting with uncaught exception (group=0x40015560) 05-29 02:55:34.000: ERROR/AndroidRuntime(598): FATAL EXCEPT...

evolveStar Join

Will these parts be ok for a fbl conversion?

helifreak.com - 2013-03-17 00:59:41 - Similar - Report/Block

Ive got a spare align 3g lying around so was planning on converting a blade 450 to fbl. I want to use 450x parts to convert it. Everythings stock apart from the tail servo that is a savox one. Are these parts all thats needed or am I missing anything: Blade 450x blade grips Blade 450x feathering shaft Blade 450x head block Blade 450x wash...

Blade 300x w/o AR7200BX

helifreak.com - 2013-05-27 00:07:11 - Similar - Report/Block

Blade 300x airframe ESC, Motor, Servos Includes Blade CF blades Blade Yellow Tail Blades Blade Stock Blades Blade Stock Tail blades 3 x E-Flite 1350mah 30c NIP: Flybarless Linkages NIP: 2 x Tail Shaft's Price: $130 Shipped CONT US, PayPal only...

TREX 500 "Wobble"

helifreak.com - 2013-05-08 11:31:59 - Similar - Report/Block

Hi, I just finished building a Trex 500 kit. The frame and head are used. (it's the flybar head.) When I first lift off, it takes off in to a nice stable hover. As I begin to give cyclic inputs to keep it hovering in one spot, the entire heli begins to wobble violently. The best way I can describe it is like a spinning top that begins to...

Transitioning from Blade 300x to Trex 450 Pro

helifreak.com - 2013-03-14 03:01:01 - Similar - Report/Block

Good evening. I have been flying a Blade 300X for a while, and with that heli I was able to do basic 3D and all that stuff with no difficulty. Today a fellow heli pilot offered me a great deal on a Trex 450 Pro, which I took. However, the change was very radical. I was really nervous at my first hovering with the Trex. The power of the Sc...

LEGO Armageddon’s Blade

theawesomer.com - 2013-02-20 00:30:00 - Similar - Report/Block

LEGO fanatics Siercon and Coral built this awesome 6-foot-long LEGO sword for the Iron Builder 3.0 Tournament , without glue, using Technic bricks and pins to hold it together. Please put this on Cuusoo Hat Tip Link More Awesome Stuff for You to Click On: SOG Blade Light Triple-Blade “Throwing” Knife Blade Driver Crossbow Infinity Blade:...

CA GANADORU Aero Mirrors S13 and S14 $400 a pair

zilvia.net - 2013-02-06 05:28:11 - Similar - Report/Block

Shipping from Japan using USPS Priority shipping. Will provide tracking #s. These are already boxed up and ready to ship. 180sx Ganador mirrors are red and in good condition. No cracked lenses or plastic. The plugs have been cut for some reason but you can still splice them into your harness with no trouble. Deff require paint as the red...

Smash Hit ‘Infinity Blade’ Free for First Time

ifans.com - 2013-02-14 18:10:40 - Similar - Report/Block

Smash hit action game Infinity Blade is now a free download on the App Store for the first time ever, but only for a limited time. The Epic Games title is currently part of Apple’s App of the Week promotion, making the iOS blockbuster absolutely free. Infinity Blade was released in 2010 to much fanfare, Continue reading Smash Hit ‘Infini...

Which helis from Phoenix 4.0 is like the Blade 300 X

helifreak.com - 2012-08-06 10:39:45 - Similar - Report/Block

Hello, Just bought the Phoenix 4.0 because I'd like to improve my skills on my Blade 300 X. Unfortunately the Blade 300 X itself is not contained. I tries with the T-Rex 250 3D but it doesn't feel the same. Do I maybe expect to much from the SIM, should I try another model or wait till Phoenix gets hopefully an update with the Blade 300 X...

Fore aft wobble?

helifreak.com - 2013-04-20 20:21:51 - Similar - Report/Block

Dialing in my 500EFL... In hover and forward flight I'm seeing a consistent fore aft oscillation. It happens at a moderate frequency; perhaps 1 or 2 cycles per second. The heli appears to be rock solid and no vibratios or blade tracking issues, etc.. Anyone have any ideas?...

BLADE 130X 3-1 BOARD FOR SALE

helifreak.com - 2013-02-26 09:26:38 - Similar - Report/Block

anyone interestd in brand new 3-1 board for blade 130x let me know ur email i will send u details....price very good...

blade 300x bnf

helifreak.com - 2013-03-26 00:35:37 - Similar - Report/Block

i have a pretty new (maybe 2 months old) blade 300x for sale. it will come with two glacier 1300mah 30c lipos that have about 2-3 flights each. it also has a trex450 tail and the ar7200bx has been moved to the top, have CF tail fin and stabilizer, xt60 connectors added to esc and batteries, everything is like new. there will be NO charger...

450 head bearings

helifreak.com - 2012-08-23 18:37:02 - Similar - Report/Block

I am re assembling a blade 450 rotor head and I'v purchased the blade grips and the thrust bearings but could not find the regular bearings that complete the head assembly.Does anyone know what size and/or part number for the head bearings?I think I'v found the answer in the bible.Is the bearing # 1605 for the blade grip bearings? Also wh...

Good news for Blade 300X owners

helifreak.com - 2012-09-11 11:07:27 - Similar - Report/Block

Just saw this post on Fusuno facebook http://www.facebook.com/photo.php?fb...t ype=1&theater Looks like they finally offer some nice canopies for Blade 300X...

KBDD tail blade changed in designs?

helifreak.com - 2012-09-14 04:58:15 - Similar - Report/Block

A friend of mine has a pair of neon yellow tail blade bought recently and the seller said that it is KBDD blade. When I look at the blade it has different shape than we see usually and the corner of the blade is like the black blade in the photo. Whereas the KBDD tail blades are different as you can see from another photo. Well, has KBDD...

several helis up for grabs

helifreak.com - 2013-06-05 06:20:54 - Similar - Report/Block

ok, so I bought a new heli and need a few things for it.....looking for an ikon fbl unit, or dx7 or dx8. up for grabs.....all these helis are either brand new, or in brand new condition. all come with box, paperwork, extra parts included with the box, batt and charger. Blade Nano Cpx Blade Mcpx Blade mcpx-bl Blade 130x Blade 300x pm me or...

Stripped Blade Grip

helifreak.com - 2013-04-20 18:02:53 - Similar - Report/Block

I stripped one of my main blade grips and want to put nuts on instead of replacing anything. Does anyone know the size of the main blade bolts? And where is a good place to buy nuts? Thanks!...

blade 450 motor and blade 400 esc

helifreak.com - 2013-03-24 02:02:30 - Similar - Report/Block

got a spare blade 450 motor for sale slight use, $20 ,, and a blade 400 esc hardily used $ 15 p me if interested , may trade if need be...

Blade CF rotors blade balancing and curves

helifreak.com - 2012-09-16 13:26:08 - Similar - Report/Block

Today im looking at swapping out my woodies for a set of genuine blade CF blades. Would anyone kindly let me know the best way to balance these and what i would need to do with regards to pitch/throttle curves as well as any BeastX magicary??? Ive held off putting these puppies on as i have been a little unsure of the procedure... Unfortu...

New to site and need Blade 450 help.

helifreak.com - 2013-05-21 07:06:17 - Similar - Report/Block

Good day everyone. I'm my wives caregiver and don't have the privilege of reading through the pages looking for setup help for Blade 450 3D. Any advise on gyro setup settings as mine doesn't seem to work at all. Suggestions please. Many thanks.

STRETCHED FBL CF PROTOS 500, MKS, NIB PULSE ULTRA, ENOUGH SPARES TO BUILD ANOTHER!!

helifreak.com - 2013-04-26 06:58:55 - Similar - Report/Block

So I haven't touched this thing since building it and flying it a handful of times while deployed over seas about 6 months ago. This bird is IMMACULATE, the wire routing is as good as it gets. Truly a work of art Issues ? One of the main rotor blade grips cracked when landing on a setup flight after converting to stretch. I dragged the ta...

Blade 130X spare parts

helifreak.com - 2013-03-11 04:00:52 - Similar - Report/Block

Here are some spare parts left over from my Blade 130X 2 sets B130X17-R Xtreme BLADE 130X Tail Blade Red 130 X 9.38 (New) 2 sets B130X15-R Xtreme BLADE 130X Tough Main Blade Red 130 X 13.40 (New) 1 BLH3721 Tail Pushrod Support/Guide Set: 130 X 4.54 (New) 1 BLH3719 Blade Torque Tube 7.84 (New) 1 BLH3726 Tail rotor pitch lever set 130 X 7.2...

Blade 500X - Should I put any expo for maiden?

helifreak.com - 2013-02-15 10:24:22 - Similar - Report/Block

Hi.My tracking number shows I should have my Blade 500X on Tuesday! I even submitted for a 1 week vacation from work starting this Monday just for the 500X! Its still on pending and should have my answer this afternoon! :) I really can't wait untill 4 more days! Anyway I have read the manual online and it shows no expo at all. My flying s...

Blade 450-3D for NAZA GPS unit?

helifreak.com - 2013-02-22 02:50:23 - Similar - Report/Block

I've got a Blade 450-3D I'd like to trade for a NAZA GPS unit (just the GPS, not the flight controller). Heli has only been flown a couple times, in great shape. I'll post/send pictures if anyone is interested. If you have good feedback, I'll ship first, too.

Blade 120 SR question

helifreak.com - 2013-03-13 02:21:27 - Similar - Report/Block

Hello all, I'm new to the site and new to RC Heli's (got into the hobby in Dec '12). I own a few RC's so far and 1 being a Blade 120 SR (blade mSR, and blade SR for future). I bought the Blade 120 SR 2nd hand and i'm having a concern and wanted to ask around to see if what I think is a issue is or is not. Ok on to the issue, I noticed wh...

Blade mCP X v2 BNF for Sale

helifreak.com - 2012-09-07 03:04:03 - Similar - Report/Block

A used Blade mCP X v2 BNF (stock) with extras is being auctioned on eBay. In a separate auction are new parts in original packages for the mCP X. Blade mCP X v2 BNF with Extras Blade mCP X v2 New Parts Thanks for looking.

New blades = new life! (question though)

helifreak.com - 2013-04-25 05:17:16 - Similar - Report/Block

So I went to my lhs today and picked up some CF blades and new landing skids which I had broken on a previous hard landing. While I was at it I installed the frame stiffener that I bought a few weeks back. I've already done the Loctite motor mod. This motor doesn't seem to have much vibration. The all black CF blades were a little hard to...

Blade SR Huey!!!

helifreak.com - 2013-06-05 02:21:47 - Similar - Report/Block

Looking for a Blade SR Huey. Has to be in good shape and working.

Razer Blade 14英吋遊戲筆電亞洲首次亮相 美國與加拿大率先開放預購

gamebase.com.tw - 2013-06-04 06:15:59 - Similar - Report/Block

知名高階精密遊戲、生活型態周邊裝置、軟體及系統開發製造商 Razer 宣布,將於 Computex 期間展出五月底剛上市的 Razer Blade 14 英吋遊戲筆電。Razer 共同創辦人、執行長暨創意總監陳民亮表示:「這是 Razer Blade 14 英吋遊戲筆電在亞洲的首次亮相,這是史上最輕薄且效能最強大的 14 英吋遊戲筆電,厚度僅僅 1.67 公分。Razer 對遊戲熱愛的精神在開發產品與設計上展露無遺。」 Razer Blade 14 吋遊戲筆電厚度僅 1.67 公分 Razer Blade 14 英吋具備超執行緒技術(基頻 2.2 GHz/ 倍頻 3.2GHz)的第四代 Intel Core i7 四核心處理器所驅動,內建最新 NVIDIA GeForc...




dialogShowMessage!

Fill out the form you see below. Registration is free, fast and simple.
If you are already registered, sign in page login.


Web Site :
Required Field
First Name :
Required Field
Last Name :
Required Field
Email :
Required Field
Sex :
Required Field

evolveStar.com is free for ever !


evolveStar.com provides a search engine that allows you to gather information to write their own blog.


evolveStar.com enhances the sources displaying the logo of the site.


If you want to remove your site or you believe a site listed infringes copyright, please report it to: info@evolvestar.com


Specifies the subject copyright violation and the url of the page


evolveStar.com respecting the law DMCA (Digital Millennium Copyright Act) will immediately remove whatever its merits.


Next will be effectual and relevant checks.







Who We Are Partner Advertising Contacts Privacy terms Help & FAQ

© Copyright 2010-2017 Fabrizio Fichera. All rights reserved.