Mounting HC3sx in T-Rex 500 Pro DFC

Hi Folks, I have finished the mechanical build of a T-Rex 500 Pro DFC and am now embarking on mounting the Helicommand and connecting the electrics. I intended to mount the Helicommand on the tray above the tail drive assembly. When I went to do this I found that the HC3sx fitted between the frames but fouled the plastic mounting rail on...

Trex 550e + T8FGS + HC3SX

I have a flybar trex 550e + Futaba T8FGS. I am thinking of converting it to FBL with DFC head and to use Helicommand's HC3SX. Has anyone got this combination? Any remarks or settings that you could share (transmitter, other)? Thank you...

550e + T8FGS + HC3SX

I have a flybar 550e + Futaba T8FGS. I am thinking of converting it to FBL with DFC head and to use Helicommand's HC3SX. Has anyone got this combination? Any remarks or settings that you could share (transmitter, other)? Thank you...

Videos of hc3sx sl mode??

Hey guys. I'm not sure if this is just how sl mode is or if my head gains are to high but it seems to me the in sl mode the heli over corrects a little to much in one direction before it comes back level. I Am fly it with about 80% in sl mode. Anybody have a link to tube vids?...

Vortex Flight Mode Setup

Hello, I apologize for my ignorance in advance. I'm thinking about getting a VX1 so I have been watching the set up videos. I'm hoping someone could clarify the Flight Mode setup on the Vortex for me. I have watched the videos by Bob O and Angelos, and while I get the jist of what is being shown, I'm still confused on a few issues. 1. I d...

HC3SX best money I've ever spent

HC3SX has given me confidence to try different manoeuvres . It's saved me a few times already so that's $$$ in my pocket. Will be putting the DEMON on my next heli that's for sure........ Very happy user...

Bruze Lee Videos for Android

App Pluz This is Videos about Bruce Lee Videos This app is made for people who want to watch Bruce Lee Videos. Enjoy this Bruce Lee Videos app. Disclaimer: All videos are shortcuts to free videos of... FREE

Flight mode issue

Hi guys well I have a dx8 and the other day was flying no issues. Today went out to fly again and when I go to switch my flight mode to 1 or 2 I get nothing don't hear the power change like I should what things do I need to check. Thanks.

Helicommand HC3SX

Like the title says, selling slightly used HC3sx FBL controller.I am parting out a AS350 scale 500 with HC3SX inside to finance another project .The unit was bought in www. guenther modellsport .de and I have the original receipt. http://www.guenther-modellsport.de/i...- hc3_-_sx.html As you already know this is the FBL controller with one...

New, never used helicommand hc3sx for sal

I purchased this for a spare protos 500 stretch build that I have not even started yet, though I have had the kit for a while. I have decided to just concentrate on my other helis and improve my flying skills with my mini protos 6s stretch and current protos 500 stretch with hc3sx. However I have an urge to build a decked out 130x with al...

Tips Please - HC3SX with DX7 & Atom 500

I've been lurking around here for a while and have some idea (thanks to seasick78, popokatepetl and many others) on the process to set up a HC3SX unit. I plan to keep plugging away until I get the programming done then get some local help to check it over before the first flight. But should I set the Atom 500 mechanically with a standard...

S3 stuck in Safe Mode even rebooting wont help..pls help thnx

Hi guys my s3 was stuck in safe mode, i have tried several procedures like rebooting,removing the battery for several times but still it doesnt figure it out, can someone help me in fixing this out,im seeking for your advices and it would be highly appreciated.. Thnk you guys and one more thng my volume down button is not working,i dont k...

[F/S] HelliCommand HC3SX!

I think the title pretty much sums it up...I am parting out a trex 500 to fund another project (again.) Up for sale is a lightly used (17 flights) Hellicommand HC3SX. If you know this unit, then you know how awesome it is. It will come w/ everything as if it were new IE: HC3SX, program USB stick, USB interface cable, the stickers (minus a...

F-mode switch

Hopefully not a silly question, but in setting up y new hc3sx on trex550 and dx8 it occurred to me to ask about F-Modes. I use the switch on my radio to hover in pos 1 with mt throttle curves at 0,75,75,75,75 and pitch curve at 40,45,50,75,100 then once in flight I switch up to second position where my throttle curve is 0,90,90,90,90 and...

Will a slanted stand affect HC3sX on start up?

If I put a 10mm lower landing skid in front, the taller one in back so that the tail will point upward more, will that screw up HC3sX during start up and initialization?...

Kosmik and hc3sx

Hi I've set up a Logo 700 with a Kosmik cool 200. Does anyone know if there is a reset on unplugging time period?? I have HC3sx on board, if I plug packs in for first flight everything initiates very fast, but say I unplug a pack and then plug it in again (within 10-20seconds from unplugging) the Esc puts power to HC3sx but does not initi...

HC3sX Goblin 630 Setup Question

I have setup my new Goblin 630 and HC3sX to fly fine but the HC3sX corrects any stick input very quickly; so if I say go in forward flight, the moment I let go of the stick, it immediately corrects itself and tilts backwards enough to be horizontal. Happens with aileron input too. I'm looking to delay or soften any reaction of the HC3. An...

Mounting HC3Sx on a Trex 550

I did a search and couldn't find it, so anyway, if you have a Trex 550dfc, were are you mounting the HC3Sx. I'm just going to use two sats, works fine I'm my 600, so I'll just stick with it. Thanks...

Hacker Turnado A50-12L with Helijive Advice

Hi Guys, Need advice pls. Do you guys run the A50 in normal mode or in KSA mode with Helijive ? Thanks...

hc3sx and tm1000. bind help please

ok so after having issues with power loss during flight and the heli being introduced to the ground i am almost ready to maiden my stretch rebuild. i want to have the tm1000 on board to get more info than i get with the cc esc and also to compare the data from both! last night i tried to bind the tm and had no sucsses! i plugged the powe...

Trex 450dfc and Trex 600dfc, loaded with KDE parts.

I'm thinking of selling both of these helis. They are both full of just about every KDE part that they produce. And both run with Hellicomand HC3Sx. Take a look at the pics, I'll try to post a full list of parts for each later. They will also come with new batteries, 3 pairs for the 600 and 4 for the 450, the 600 also comes with two RX pa...

Comment on What Can You Make With Google’s Cute Little Binary I/O Easter Egg? by keviveck

codes are there in https://developers.google.com/events/io/ js/app.min.js …. ww.mode.register(“home”, ww.mode.HomeMode, null); ww.mode.register(“cat”, ww.mode.CatMode, 231, 8); ww.mode.register(“space”, ww.mode.SpaceMode, 42, 8); ww.mode.register(“pong”, ww.mode.PongMode, 129, 8); ww.mode.register(“bacon”, ww.mode.BaconMode, 144, 8); ww.m...

Tai Chi Videos for Android

CJ Apps The ultimate Tai Chi Videos fanatics App! This is the only app you need when it comes to Tai Chi Videos. Do you want to get the latest updates, news, information, videos, photos, events and amazing deals about Tai Chi Videos? Then download... FREE

Talon 90 Bench Failure

Hey guys. A bit of a heads up. Wanted to document my failure for the community. I am in the process of wrapping up my 500 build (scopion 4020-1350, mks cyclics, bls 251 rudder, hc3sx). After finishing up the transmission, motor mount and wiring, I decided to spin up the scorpion on the bench (no blades or tail hooked up). I ran the motor...

Always View Videos In Landscape Mode On iPhone With LandscapeVideos

If an app cannot play videos in landscape mode, not many people are going to use it on the iPhone’s rather small screen. Most good developers add landscape support for videos in their iOS apps, but the practice is not universal. Even if a video can be viewed in landscape, there is no way of bypassing the orientation lock just for video pl...

Pilates Videos for Android

Appllica Quick and easy way to find Pilates videos. Access many Pilates videos. A great way to find Pilates Lessons. Short videos of Pilates tutorials. Application features: 1. Pilates videos 2. Search Pilates videos 3. Bookmark your favorite Pilates... FREE

Scorpion 4225-610 with Helijive

Sorry Guys, Went with the above motor. Need advice pls. Do I run in normal mode or does the Scorpion needs to run in KSA mode ? Thanks...

Futaba link question.

Hi all Well I have taken the plunge and my Futaba 14sg and R7008Sb are sitting here looking at me. Just so I am clear on this. 1. I set the R7008SB into mode 2 for sbus? 2. I link it to the 14SG 3. I link R7008sb to HC3sx as per Helicommand instructions using one cable (sbus port 8 on R7008sb) 4. Servos into hc3sx during the setup sequenc...

naza gps mode question

okay guys so I got my naza gps upgrade in the mail today and got it all installed and calibrated. but now I have a question, when i'm flying in the gps mode will the quad rth if it loses signal or do I have to set something up in my radio other than the gps mode to get it to rth if it loses signal?...

Trex 500 w/ HC3SX performance inquiry

Hey guys- I have an HC3SX that was just delivered for my trex 500 'practice heli' build. I was sort of informed that this unit doesn't fly this heli as well as some other FBL units can. I got this for the 'all in 1' purposes...IE: bailout (mainly), FBL, Rx's. I used a beastX, 3g, 3gx and skookum 720...the ONLY good fbl unit so far has bee...

Bailout and horizon mode dx18

Hi guy, I'd like to set my hc3sx with bailout on a switch that I've modified to a momentary switch on my dx18. Once I set this up how do I go about setting up another switch to go into horizon mode ( self levelling ). It would be nice to setup the self levelling amount on a rotary switch and still have a momentary switch to activate Capt.

Help needed in setting kosmik 160

Hi guys,I'm trying to set up my kosmik 160 with my Hc3sx.Im sure that all the connecting cables are done correct .I'm getting flashing light in my hc3sx but nothing at all from ESC ,even no light in lead 1or 2. I pressed the press button to start but again nothing happened.any recommendation....?:arggg:...

Need Help with cofiguring a Gov to HC3sx

Help I want to hook a gov To this thing HC3sx Tonight..................

HC3SX + 450X = ?

I have a blade 450x with the beast in it. I also have a raptor 50 with a hc3sx in it. I don't fly the 50 much right now....so... Am I a fool for taking the hc3sx and putting it into the 450 for a while? I haven't used the HC much and would like to become more familiar with it. I figure 450x parts are cheap.... what do you think? Thanks Wa...

Waht is better mode 1 or mode 2

HI HELIFREAK team I would like to know which mode is better because i have learned alone in mode 1 and i can see all topics are in mode 2 my question is to have some information about that it will be better to practice in mode 2 yes or not in this case i need to learn in mode 2 but i don't know because in France it's different than USA I...

Using Spektrum DX18 to tune HC3SX

Hi guys, I finally maidened my HC3SX on my miniProtos. I had installed it on my Goblin but a crash on my Trex 450 unnerved me enough to put off trying to fly the 700 for the time being. I dont have access to a really suitable field yet anyhow. So I took off the HC3SX and it went on the boom mount of the miniProtos with some overhang. Took...

Question on HC3SX and GV-1

If I don't use traditional RX, only satellites with HC3SX, can I use output 2 to GV-1's AUX to turn governor on/off? where do I connect GV1 AUX rpm to? this should be tied to flight mode switch...

450 pro v2 DFC tail won't hold

Hey guys I have a 450 pro v2 DFC with stock v2 tail bits but put on Fusuno tail orange tail blades. I can't get the tail to hold in hard collective funnels and it even used to blow out doing rainbows. I friend helped me do the grip flip mod and that helped quite a bit, it now holds a lot better but in hard funnels still blows out the tail...

Lost the tail on maiden with HC3SX...

I just maidened my TDR and my HC3SX. Everything felt great initially.Then about two minutes into the flights during a hover it started to piroette and I had no tail control. It was a rough landing, but thankfully minimal damage only. Could this be caused by incorrect gain setting? Any help much appreciated, I'm expecting great things from...

see several videos from rtsp on android device?

I just want to know if I can see several videos at once from the network using rtsp? I'm trying to do an android app similar to video surveillance and I need to see several videos at the some time in the screen, I tried to use it with MediaPlayer and after that with VideoView, but in the both cases sometimes the videos appear, sometimes g...